PiJack Ethernet HAT for Pi Zero

o 10Mbps Ethernet connection o Two blinky LEDs for connection status o HAT‐standard‐compliant EEPROM makes setup automatic, works straight away with Raspbian! o Uses the Pi Zero's GPIO pins, your USB connector is still free for something else!

PiJack Ethernet HAT for Pi Zero

PiJack is a HAT (yes, a proper HAT, not a pHAT!) add-on board for the Raspberry Pi Zero mini computer that makes connecting your Pi Zero to the Internet via Ethernet super simple. If you're fed up with flaky WiFi and want your Pi Zero to be online all the time, then this HAT is for you!\n\nPiJack is

功能：以太网 包装：散装 描述：DEVELOPMENT INTERFACE 开发板，套件，编程器 评估板 - 扩展板，子卡

包装：散装 描述：CC H 1/4 BLACK 电缆，电线 - 管理 电缆支撑与紧固件

Nylon Cable Clamps

文件：84.39 Kbytes Page：1 Pages

Heyco짰 Nylon Cable Clamps

文件：100.33 Kbytes Page：1 Pages

丝印代码：3374N；4-Line TV S for Ethernet Interfaces

Features Ultra low leakage: nA level Operating voltage: 3.3V Low clamping voltage Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lighning) 40A (8/20μs) RoHS Compliant

丝印代码：3374N；Low Capacitance Array for ESD Protection Diode

Features * Low operating voltage: 33V * Ultra low capacitance: SpF (Max) * Ultra low leakage: nA level * Low clamping voltage * Complies with following standards: * ~ [EC 61000-4-2 (ESD) immunity test Air discharge: £30kV Contact discharge: +30kV * — IEC61000-4- (Lightning) 40A (8/20ps)

丝印代码：3374N；4-Line TVS for Ethernet Interfaces

文件：694.11 Kbytes Page：4 Pages

丝印代码：3374N；High Power TVS for Ethernet Interfaces

文件：171.46 Kbytes Page：9 Pages

System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver

Features • 1.0Mbps CAN transceiver bus interface with bus diagnostic capability • SPI control at frequencies up to 4.0Mhz • 5.0V low dropout voltage regulator with current limiting, over temperature prewarning, and output monitoring and reset • a Second 5.0V regulator capability using

System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver

The 33742 and the 33742S are monolithic integrated circuits combining many functions frequently used by automotive environmental control units (ECUs). The 33742 is an SBC having a fully protected fixed 5.0 V low-drop regulator with current limit, overtemperature pre-warning, and reset. An output d

System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver

The 33742 and the 33742S are monolithic integrated circuits combining many functions frequently used by automotive environmental control units (ECUs). The 33742 is an SBC having a fully protected fixed 5.0 V low-drop regulator with current limit, overtemperature pre-warning, and reset. An output d

System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver

Features • 1.0Mbps CAN transceiver bus interface with bus diagnostic capability • SPI control at frequencies up to 4.0Mhz • 5.0V low dropout voltage regulator with current limiting, over temperature prewarning, and output monitoring and reset • a Second 5.0V regulator capability using

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

3374 - 4mm Square Trimming Potentiometer

Features n Surface Mount / Single-Turn Cermet / Process Sealed n Elastomer seal allows multiple adjustments (5 rotations) n Compatible with all surface mount manufacturing processes n Recommended for reflow processing only n Cross-slot rotor design suitable for automatic adjustment equipm

System Basis Chip with Enhanced High Speed CAN Transceiver

文件：1.94487 Mbytes Page：70 Pages

System Basis Chip with Enhanced High Speed CAN Transceiver

文件：1.94487 Mbytes Page：70 Pages

System Basis Chip with Enhanced High Speed CAN Transceiver

文件：1.94487 Mbytes Page：70 Pages

Low Capacitance for EIA RS-232 and EIA RS-422 Applications

文件：365.47 Kbytes Page：2 Pages

Protects up to eight lines

文件：171.46 Kbytes Page：9 Pages

Protects up to eight lines

Radiation Hardened 8-Bit Bidirectional CMOS/TTL Level Converter

The Intersil HS-3374RH is a radiation hardened 8-bit bidirectional level converter designed to interface CMOS logic levels with TTL logic levels in radiation hardened bus oriented systems. The HS-3374RH is fabricated using a radiation hardened EPI-CMOS process and features eight parallel bidirecti

짹15kV ESD-Protected, 1關A, 16Mbps, Dual/Quad Low-Voltage Level Translators in UCSP

General Description The MAX3372E–MAX3379E and MAX3390E–MAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCCand VL, set the logic levels on either side of the device. A low-voltage

짹15kV ESD-Protected, 1關A, 16Mbps, Dual/Quad Low-Voltage Level Translators in UCSP

General Description The MAX3372E–MAX3379E and MAX3390E–MAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCCand VL, set the logic levels on either side of the device. A low-voltage

짹15kV ESD-Protected, 1關A, 16Mbps, Dual/Quad Low-Voltage Level Translators in UCSP

General Description The MAX3372E–MAX3379E and MAX3390E–MAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCCand VL, set the logic levels on either side of the device. A low-voltage

GaAlAs Infrared Emitting Diodes

文件：29.91 Kbytes Page：1 Pages