丝印代码：3032；WL-OCTR Optocoupler Triac

General Information: Operating Temperature -40 °C up to +100 °C Storage Conditions (for single parts) -55 °C up to +150 °C Storage Conditions (in original packaging)

丝印代码：3032；WL-OCTR Optocoupler Triac

General Information: Operating Temperature -40 °C up to +100 °C Storage Conditions (for single parts) -55 °C up to +150 °C Storage Conditions (in original packaging)

丝印代码：3032；WL-OCTR Optocoupler Triac

General Information: Operating Temperature -40 °C up to +100 °C Storage Conditions (for single parts) -55 °C up to +125 °C Storage Conditions (in original packaging)

丝印代码：3032；Single N-Channel, 30V, 9.6A , Power MOSFET

文件：1.94369 Mbytes Page：8 Pages

丝印代码：3032；Single N-Channel, 30V, 9.6A , Power MOSFET

文件：1.94369 Mbytes Page：8 Pages

281.25 MHz Bandpass Filter

General Description KR Electronics part number 3032 is a 281.25 MHz bandpass filter. The filter has a minimum 3 dB bandwidth of 34 MHz. Other bandwidths and center frequencies are available. Please consult the factory. Features ● 281.25 MHz Bandpass Filter ● 34 MHz min 3 dB Bandwidth ● Sharp

90 CROSSOVER HYBRID COUPLER 800-900,890-960, OR 1700-1900 MHZ

Description M/A-COMs 3032 Series of 90° Crossover Hybrid Couplers provide low loss, high isolation answers to your coupling needs. Features • Type N jack • Low Loss • High Isolation

包装：散装 描述：MICROSOFT AZURE IOT STARTER KIT 创客/DIY，教育 教学套件

THRU HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL RETAINERS

文件：392.48 Kbytes Page：1 Pages

Microsoft Azure IoT Starter Kit w/ Adafruit Feather HUZZAH

文件：89.02 Kbytes Page：2 Pages

Vent Plugs and Thick Panel Vent Plugs

文件：111.26 Kbytes Page：1 Pages

包装：散装 描述：BATT RETAIN COIN 1 CELL PC PIN 电池产品 电池座，电池夹，电池触头

MIDGET, PC MOUNT & MINIATURE FUSES

FEATURES/BENEFITS : • For supplemental protection of small motors and transformers • Extended ratings for special protection of capacitors and circuits with high inrush currents • 600VDC ratings for a wide variety of applications including photovoltaic and solar applications. • Can be used w

Fast-Acting Midget Fuses

FEATURES/BENEFITS : • Low cost and fully rated for economy without compromise • Can be used with UltraSafe™ fuse holders • 1 1/2 x 13/32 (10 mm x 38 mm) dimensions

SMALL FUSE - BIG PROTECTION FOR GENERAL CIRCUITS

FEATURES/ BENEFITS : • Rejection-style design prevents replacement errors when used with recommended fuse blocks • Versatile design for individual component and branch circuit protection

MIDGET, PC MOUNT & MINIATURE FUSES

FEATURES/BENEFITS : • For supplemental protection of small motors and transformers • Extended ratings for special protection of capacitors and circuits with high inrush currents • 600VDC ratings for a wide variety of applications including photovoltaic and solar applications. • Can be used w

Fast-Acting Midget Fuses

FEATURES/BENEFITS : • Low cost and fully rated for economy without compromise • Can be used with UltraSafe™ fuse holders • 1 1/2 x 13/32 (10 mm x 38 mm) dimensions

FBS 50-5 BU - 插拔式桥接件

插拔式桥接件， 针距: 5.2 mm， 位数: 50， 颜色: 蓝色

FBS 50-5 GY - 插拔式桥接件

插拔式桥接件， 针距: 5.2 mm， 位数: 50， 颜色: 灰色

STI 2,5-PE/L/LTB - 建筑安装用接地端子

建筑安装用接地端子， 标称工作电压: 400 V， 额定电流: 24 A， 回拉式弹簧连接， 第一和第二层， 额定接线容量: 2.5 mm2， 横截面: 0.08 mm2 - 4 mm2， 额定接线容量: 2.5 mm2， 安装方式: NS 35/7,5， NS 35/15， 颜色: 灰色

FBS 2-5 GN - Plug-in bridge

Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green

RB 35-16 - Reducing bridge

Reducing bridge, pitch: 14 mm, number of positions: 2, color: red

SMALL FUSE - BIG PROTECTION FOR GENERAL CIRCUITS

FEATURES/ BENEFITS : • Rejection-style design prevents replacement errors when used with recommended fuse blocks • Versatile design for individual component and branch circuit protection

MIDGET, PC MOUNT & MINIATURE FUSES

FEATURES/BENEFITS : • For supplemental protection of small motors and transformers • Extended ratings for special protection of capacitors and circuits with high inrush currents • 600VDC ratings for a wide variety of applications including photovoltaic and solar applications. • Can be used w

Fast-Acting Midget Fuses

FEATURES/BENEFITS : • Low cost and fully rated for economy without compromise • Can be used with UltraSafe™ fuse holders • 1 1/2 x 13/32 (10 mm x 38 mm) dimensions

SMALL FUSE - BIG PROTECTION FOR GENERAL CIRCUITS

FEATURES/ BENEFITS : • Rejection-style design prevents replacement errors when used with recommended fuse blocks • Versatile design for individual component and branch circuit protection

MIDGET, PC MOUNT & MINIATURE FUSES

FEATURES/BENEFITS : • For supplemental protection of small motors and transformers • Extended ratings for special protection of capacitors and circuits with high inrush currents • 600VDC ratings for a wide variety of applications including photovoltaic and solar applications. • Can be used w

Fast-Acting Midget Fuses

FEATURES/BENEFITS : • Low cost and fully rated for economy without compromise • Can be used with UltraSafe™ fuse holders • 1 1/2 x 13/32 (10 mm x 38 mm) dimensions

FBS 1/3-5 - Plug-in bridge

Plug-in bridge, with punched-out middle contact tab, pitch: 5.2 mm, number of positions: 3, pin assignment: 1,3, color: red

FBS 1/3-6 BU - Plug-in bridge

Plug-in bridge, pitch: 6.2 mm, number of positions: 3, nominal current: 32 A, pin assignment: 1,3, color: blue

WE-LT Conductive Shielding Gasket

General Information: Operating Temperature -20 °C up to +80 °C Storage Conditions (in original packaging) 5 °C up to ;

FBS 1/3-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 3, pin assignment: 1,3, color: red

FBS 1/4-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 4, pin assignment: 1, 4, color: red

FBS 1/2/4/6-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 4, pin assignment: 1, 2, 4, 6, color: red

FBS 1/5-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 5, pin assignment: 1,5, color: red

FBS 1/3/5-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 5, pin assignment: 1,3,5, color: red

SMALL FUSE - BIG PROTECTION FOR GENERAL CIRCUITS

FEATURES/ BENEFITS : • Rejection-style design prevents replacement errors when used with recommended fuse blocks • Versatile design for individual component and branch circuit protection

FBS 1/4/7/10-8 - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 10, pin assignment: 1,4,7,10, color: red

UAB 1 - Support bracket

Support bracket, number of positions: 1, mounting type: DIN rail mounting, color: gray

P-CO 2-5 R47K - Component connector

Component connector, with 47 kOhm resistance for wire-break monitoring, pitch: 5.2 mm, depth: 34.8 mm, width: 4.1 mm, height: 8.9 mm, number of positions: 2, color: black

P-CO 1N4007/R-L - Component connector

Component connector, with diode1N4007, depth: 33.3 mm, width: 5.2 mm, height: 24.2 mm, number of positions: 1, color: gray, mounting type: Plug-in mounting

P-CO 1N4007/L-R - Component connector

Component connector, with diode1N4007, depth: 33.3 mm, width: 5.2 mm, height: 24.2 mm, number of positions: 1, color: gray, mounting type: Plug-in mounting

FBS 1/4-6 - Plug-in bridge

Bridge for potential distribution

FBS 1/5-6 - Plug-in bridge

Bridge for potential distribution

FBS 2-8 BU - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 2, color: blue

FBS 3-8 BU - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 3, color: blue

FBS 4-8 GY - Plug-in bridge

Plug-in bridge, pitch: 8.2 mm, number of positions: 4, color: gray

PAI-4-FIX RD - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: red

PAI-4-FIX YE - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: yellow

PAI-4-FIX GN - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: green

PAI-4-FIX VT - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: violet

PAI-4-FIX BK - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: black

PAI-4-FIX BN - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: brown

PAI-4-FIX GY - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: gray

PAIS-4-FIX GY - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, number of positions: 1, color: gray

PAIS-4-FIX BK - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, number of positions: 1, color: black

PAIS-4-FIX RD - Test adapter

Test adapter, Do not plug in while the power is connected, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, number of positions: 1, color: red

PAIS-4-P/P BK - Test adapter

Test adapter, Only use in UDK 4 MTK-P/P and UK 5-MTK-P/P, For 4 mm test plugs, number of positions: 1, color: black

PAIS-4-P/P RD - Test adapter

Test adapter, Only use in UDK 4 MTK-P/P and UK 5-MTK-P/P, For 4 mm test plugs, number of positions: 1, color: red

PAI-4-FIX WH - Test adapter

Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, number of positions: 1, color: white