2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65 V to 3.6 V • AEC-Q100 automotive qualified • Operating temperature grade 1: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14 μA (125°C maximum) • Up to 100 Mbps support across the full supply range • VCC Isolation Feature – I

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

1 位双电源缓冲电压信号转换器

2N7001T 是一款采用两个独立可配置电源轨的单比特位缓冲电压信号转换器，可对单向信号进行上行或下行电平转换。该器件通过 1.65V 至 3.60V 的 VCCA 和 VCCB 电源供电。VCCA 定义了 A 输入端的输入阈值电压。VCCB 定义了 B 输出端的输出驱动电压。\n\n该器件完全 适用于 使用 Ioff 电流的局部掉电应用。当器件掉电时，Ioff 保护电路可确保不从输入/输出或偏置到特定电压的快速 I/O 获取或向其提供多余电流。\n\nVCC 隔离功能确保当 VCCA 或 VCCB 低于 100mV 时，输出端口 (B) 进入高阻抗状态。 • 在 1.65V 至 3.6V 范围内进行上行和下行电平转换\n• 最大静态电流 (ICCA + ICCB) 14µA（最高 125°C） \n• VCC 隔离特性 \n• Ioff 支持局部关断模式运行 \n• 静电放电 (ESD) 保护性能超过 JESD 22 规范的要求 \n• 1000V 充电器件模型;

Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

文件：571.98 Kbytes Page：23 Pages

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65 V to 3.6 V • AEC-Q100 automotive qualified • Operating temperature grade 1: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14 μA (125°C maximum) • Up to 100 Mbps support across the full supply range • VCC Isolation Feature – I

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65 V to 3.6 V • AEC-Q100 automotive qualified • Operating temperature grade 1: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14 μA (125°C maximum) • Up to 100 Mbps support across the full supply range • VCC Isolation Feature – I

2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65V to 3.6V • Operating temperature: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14μA (125°C maximum) • Up to 100Mbps support across the full supply range • VCC isolation feature – If either VCC input is below 100mV, the output

汽车类 1 位双电源缓冲电压信号转换器

2N7001T-Q1 器件符合 AEC-Q100 标准，是一款采用两个独立可配置电源轨的 single-bit 缓冲电压信号转换器，可对单向信号进行升压/降压转换。该器件通过 1.65V 至 3.60V 的 VCCA 和 VCCB 电源供电。VCCA 定义了 A 输入端的输入阈值电压。VCCB 定义了 B 输出端的输出驱动电压。\n\n该器件完全符合使用 Ioff 电流的部分断电应用的规范要求。当器件断电时，Ioff 保护电路可确保不从输入、输出或偏置到特定电压的组合 I/O 获取多余电流，也不向其提供多余电流。\n\nVCC 隔离功能确保当 VCCA 或 VCCB 低于 100mV 时，输出 • 在 1.65V 至 3.6 V 范围内进行上行和下行电平转换\n• 工作温度等级 1：–40°C 至 +125°C\n• 在整个电源范围内支持高达 100Mbps 的速率\n• 如果任何一个 VCC 输入低于 100mV，则输出处于高阻态\n• Ioff 支持局部断电模式运行\n• ESD 保护性能超过 JEDEC JS-001 规范要求 \n• 1000V 充电器件模型;

丝印代码：W9；2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65 V to 3.6 V • AEC-Q100 automotive qualified • Operating temperature grade 1: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14 μA (125°C maximum) • Up to 100 Mbps support across the full supply range • VCC Isolation Feature – I

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

1 Features • Up and down translation across 1.65 V to 3.6 V • AEC-Q100 automotive qualified • Operating temperature grade 1: –40°C to +125°C • Maximum quiescent current (ICCA + ICCB) of 14 μA (125°C maximum) • Up to 100 Mbps support across the full supply range • VCC Isolation Feature – I

Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages

Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

文件：571.98 Kbytes Page：23 Pages

Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages

丝印代码：DP；Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages

封装/外壳：5-XFDFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：1-BIT DUAL-SUPPLY BUFFERED VOLTA 集成电路（IC） 转换器，电平移位器

功能：电平移位器 包装：盒 描述：DEVELOPMENT INTERFACE 开发板，套件，编程器 评估和演示板及套件

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

文件：571.98 Kbytes Page：23 Pages

2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter

文件：571.98 Kbytes Page：23 Pages

Single-Bit Dual-Supply Buffered Voltage Signal Converter

文件：450.65 Kbytes Page：19 Pages