Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

110 MHz Center Frequency

General Description KR 2901 is a 110 MHz bandpass filter. The filter has a typical 1 dB bandwidth of 16 MHz. Other passband frequencies are available. Please consult the factory. Features ● 110 MHz Center Frequency ● 16 MHz 1 dB Bandwidth ● SMA Connectors ● 50 Ω Source and Load

Size C Aluminum Box With Cover

Size C Aluminum Box Wit Cover

HiFiBerry DAC HAT - Standard RCA

o Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality o Hardware volume control. You can control the output volume using “alsamixer” or any application that supports ALSA mixer controls o Directly powered from the Raspberry Pi, no additional power supply o Ultra-low-noise

包装：袋 描述：BOX ALUM BLUE 4.250\ 盒子，外壳，机架 箱

包装：袋 描述：BOX ALUM BLUE 4.250\ 盒子，外壳，机架 箱

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

ME 22,5 UTG/FE BK - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, with FE contact, tall design, without vents, width: 22.6 mm, height: 99 mm, depth: 107.3 mm, color: black (similar RAL 9005), cross connection: without bus connector, number of positions cross connector: not relevant

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

ME 22,5 UT/FE TBUS BU - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, with FE contact, tall design, with vents, width: 22.6 mm, height: 99 mm, depth: 107.3 mm, color: blue (similar RAL 5015), cross connection: DIN rail connector (optional), number of positions cross connector: 5

Insert Molded Coil

Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway ou

ME MAX 35 PLATE KMGY - Insertion plate

DIN rail housing, Insertion plate, width: 31.8 mm, height: 73.6 mm, depth: 1 mm, color: light gray (similar RAL 7035)

ME 35 UTG RD - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, tall design, without vents, width: 35.2 mm, height: 99 mm, depth: 107.3 mm, color: red (similar RAL 3001), cross connection: without bus connector, number of positions cross connector: not relevant

ME 22,5 SF-UT BK - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, ultra-flat design, without vents, width: 22.6 mm, height: 99 mm, depth: 44.3 mm, color: black (similar RAL 9005), cross connection: without bus connector, number of positions cross connector: not relevant

ME 22,5 OT-3MSTBO BK - Upper housing part

DIN rail housing, Upper housing part for connectors with header, width: 22.6 mm, height: 102 mm, depth: 60.15 mm, color: black (similar RAL 9005)

PSR-SCP-230UC/ESAM4/3X1/1X2/B - Safety relays

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, plug-in screw terminal blocks

PSR-SPP-230UC/ESAM4/3X1/1X2/B - Safety relays

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, pluggable Push-in terminal block

PSR-SCP-230AC/ESAM2/3X1/1X2/B - Safety relays

Safety relay for emergency stop and safety door up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC, plug-in screw terminal blocks

PSR-SPP-230AC/ESAM2/3X1/1X2/B - Safety relays

Safety relay for emergency stop and safety door up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC, pluggable Push-in terminal block

FOC-GDM-RUGGED-1016/IP20/... - FO patch cable

Robust GOF installation cable for assembly (IP20 heads only) for installation in stationary systems and machines, aramid strain-relief elements, with individual elements made from FRNC material, halogen-free, ozone and UV resistant, with a polyurethane (PUR) outer sheath Your advantages • Ro

FOC-GDO-1017/IP20/... - FO patch cable

Highly rugged GOF round cable (IP20 heads only) for assembly and for outdoor installation with integrated moisture barrier as well as rodent-proof scrim. Individual elements made from highly flexible FRNC material. The wire is ozone and UV resistant with a very rugged polyethylene outer sheath.

ACIC 600V, 50G C #16 Str BC, XLPE Ins, PVC Jkt, AIA Armor, Blu PVC Jkt,90C Dry/Wet SUN RES -40C

Product Description Canadian Instrumentation Cable TC-ACIC 600V, 50+G Conductor 16AWG (7x24) Bare Copper, XLPE Insulation, PVC Inner Jacket, Aluminum Interlock Armor, Blue PVC Outer Jacket, 90C Dry/Wet SUN RES -40C

ME MAX 35 LC U-U1 KMGY - Electronics housing

DIN rail housing, Complete housing with metal foot catch, tall design, with vents, width: 35.2 mm, height: 99 mm, depth: 113.65 mm, color: light gray (similar RAL 7035), cross connection: DIN rail connector (optional), number of positions cross connector: 5

Patch panels - FL-PP-RJ45-SCC

Patch panel, one RJ45 jack to 8 spring-force connection terminal blocks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, option of shield contacting to the DIN rail via jumpers Product Description Ethernet patch panels enable quick and easy connection between the field cabl

Patch panels - FL-PP-RJ45-SC

Patch panel, one RJ45 jack to 8 screw connection terminal blocks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, option of shield contacting to the DIN rail via jumpers Product Description Ethernet patch panels enable quick and easy connection between the field cabling and

Patch panels - FL-PP-RJ45-LSA

Patch panel, one RJ45 jack to 8 LSA connection terminal blocks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, option of shield contacting to the DIN rail via bridges Product Description Ethernet patch panels enable quick and easy connection between the field cabling and co

Patch panels - FL-PP-RJ45/RJ45

Patch panel, two RJ45 jacks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, option of shield contacting to the DIN rail via jumpers Product Description Ethernet patch panels enable quick and easy connection between the field cabling and control cabinet cabling. The passive

QUINT4-PS/3AC/24DC/10

Description QUINT POWER power supplies with integrated NFC interface and SFB technology ensure superior system availability. Adaptable – Signaling thresholds and characteristic curves can be set via NFC Powerful – SFB technology: 6 times the nominal current for 15 ms – Power reserves:

Uninterruptible power supply

Description The QUINT-UPS uninterruptible power supply (UPS) is used to ensure that power for critical electrical loads continues to be supplied in the event of disturbances in the power supply network, e.g., due to mains breakdown or failure. In doing so, the UPS switches to battery operatio

QUINT4-PS/1AC/48DC/5

Description QUINT POWER power supplies with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up t

QUINT4-PS/1AC/24DC/40

Description QUINT POWER power supplies with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up t

QUINT4-PS/24DC/24DC/20/SC

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/20/PT

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/20/SC/

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/10/PT/CO

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/5/PT/CO

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

ME MAX 45 DKL TRANS - Housing cover

DIN rail housing, Cover, width: 45.2 mm, height: 75.25 mm, depth: 5.5 mm, color: transparent

ACIC 600V, 2G C #16 Str BC, XLPE Ins, PVC Jkt, AIA Armor, Blu PVC Jkt,90C Dry/Wet CSA HL SUN RES -40C

Product Description Canadian Instrumentation Cable TC-ACIC 600V, 2+G Conductor 16AWG (7x24) Bare Copper, XLPE Insulation, PVC Inner Jacket, Aluminum Interlock Armor, Blue PVC Outer Jacket, 90C Dry/Wet CSA HL SUN RES -40C

ACIC 600V, 2G C #16 Str BC, XLPE Ins, PVC Jkt, AIA Armor, Blu PVC Jkt,90C Dry/Wet CSA HL SUN RES -40C

Product Description Canadian Instrumentation Cable TC-ACIC 600V, 2+G Conductor 16AWG (7x24) Bare Copper, XLPE Insulation, PVC Inner Jacket, Aluminum Interlock Armor, Blue PVC Outer Jacket, 90C Dry/Wet CSA HL SUN RES -40C

ACIC 600V, 2G C #16 Str BC, XLPE Ins, PVC Jkt, AIA Armor, Blu PVC Jkt,90C Dry/Wet CSA HL SUN RES -40C

Product Description Canadian Instrumentation Cable TC-ACIC 600V, 2+G Conductor 16AWG (7x24) Bare Copper, XLPE Insulation, PVC Inner Jacket, Aluminum Interlock Armor, Blue PVC Outer Jacket, 90C Dry/Wet CSA HL SUN RES -40C

ACIC 600V, 4G C #16 Str BC, XLPE Ins, PVC Jkt, AIA Armor, Blu PVC Jkt,90C Dry/Wet CSA HL SUN RES -40C

Product Description Canadian Instrumentation Cable TC-ACIC 600V, 4+G Conductor 16AWG (7x24) Bare Copper, XLPE Insulation, PVC Inner Jacket, Aluminum Interlock Armor, Blue PVC Outer Jacket, 90C Dry/Wet CSA HL SUN RES -40C

Multifunctional housing for complex electronics

Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with much space for the PCB assembly. The housing base can be combined with various covers. There are connection technology carriers on which the PCB plug-in connectors (FKCN 2.5...) are already p

Multifunctional housing for complex electronics

Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with much space for the PCB assembly. The housing base can be combined with various covers. There are connection technology carriers on which the PCB plug-in connectors (FKCN 2.5...) are already p

Single relay - REL-OR/LDP- 24DC/1/MB

Plug-in octal relay with power contacts, specially designed for switching high DC loads, 1 N/O contact, detectable manual operation, status LED, blowout magnet, coil voltage: 24 V DC

Single relay - REL-OR/LDP- 24DC/1

Plug-in octal relay with power contacts, specially designed for switching high DC loads, 1 N/O contact, detectable manual operation, status LED, coil voltage: 24 V DC

High Temperature Low Power Quad Voltage Comparators

Description This device consists of four independent precision voltage comparators. All these comparators are designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique

High Temperature Low Power Quad Voltage Comparators

Description This device consists of four independent precision voltage comparators. All these comparators are designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique

COLOUR TELEVISION

文件：6.0518 Mbytes Page：70 Pages

Color Monitor

文件：1.37882 Mbytes Page：43 Pages

Color Monitor

文件：1.37882 Mbytes Page：43 Pages

Fuse set - VF-SI/TR5/1AF

文件：46.39 Kbytes Page：2 Pages

Fuse set - VF-SI/TR5/1AT

文件：58.07 Kbytes Page：3 Pages

VF-SI/TR5/0,2AT - 保险丝套件

Quad Single Supply Comparators

LOW POWER QUAD VOLTAGE COMPARATORS

Quad Single Supply Comparators

Quad voltage comparator

QUAD DIFFERENTIAL COMPARATORS

QUAD DIFFERENTIAL COMPARATORS

Low power quad voltage comparator

QUAD DIFFERENTIAL COMPARATORS

Single Supply Quad Comparators

Low Power Low Offset Voltage Quad Comparators

Quad Single Supply Comparators

Single Supply Quad Comparators

QUAD VOLTAGE COMPARATOR

Low Power Low Offset Voltage Quad Comparators

QUAD DIFFERENTIAL COMPARATORS

QUAD DIFFERENTIAL COMPARATORS

Quad voltage comparator

LOWPOWER QUAD VOLTAGE COMPARATORS

QUAD DIFFERENTIAL COMPARATORS

Single Supply Quad Comparators

QUAD VOLTAGE COMPARATOR

Quad Single Supply Comparators

SINGLE-SUPPLY QUAD COMPARATOR

Integrated Circuit Low Power Low Offset Voltage Comparator

LOW POWER QUAD COMPARATOR