THR PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 7-pole; Push-in CAGE CLAMP®; 1,50 mm²; black

Item description Ideal for compact device connection, panel feedthrough and tight spaces Push-in CAGE CLAMP® allows push-in termination of solid and fine-stranded conductors with ferrules SMD and THR variants available Delivery in tape-and-reel packaging for full integration into SMT solde

Ground resistance signaling module; Ground fault alarm via digital output; Supply voltage: 24 VDC; Module width: 18 mm

Short Description The product signals a value falling below a non-adjustable, asymmetric isolation resistance between +24 V or 0 V of the supply voltage and ground by means of a potential-free con-tact (“Iso OK”) and status LED. The “Iso OK” contact can be evaluated via a PLC. This status is mai

Relay module; Nominal input voltage

Notes Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. Note • Reinforced insulation between coil and contacts • To protect the relay coils and conta

包装：散装 描述：LABELS; FOR TP PRINTERS; PERMANE 标签，标志，护栏，标识 标签，贴纸，贴标 - 空白

包装：散装 描述：LABELS; FOR TP PRINTERS; PERMANE 标签，标志，护栏，标识 标签，贴纸，贴标 - 空白

Steel camier rait 35 x 15 mm; 23mm thick;2m long; unsloted;according to EN 60715; silver-colored

文件：54.69 Kbytes Page：4 Pages

Distribution terminal block; with push-button; 1 x 6 mm² / 6 x 1.5 mm²; with integrated end plate; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray

文件：229.92 Kbytes Page：7 Pages

4-conductor through terminal block; 4 mm2; center marking;for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP;4,00 mm2;red

文件：154.95 Kbytes Page：17 Pages

4-conductor terminal strip; without push-buttons; with fixing flanges; 11- pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

文件：347.1 Kbytes Page：9 Pages

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 10-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

文件：684.57 Kbytes Page：13 Pages

3-conductor through terminal block; with push-button; 10 mm²; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm2; blue

文件：680.69 Kbytes Page：9 Pages

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; blue

文件：1.17047 Mbytes Page：11 Pages

Distribution terminal block; with push-button; 1 x 6 mm² / 6 x 1.5 mm²; with integrated end plate; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray

文件：229.92 Kbytes Page：7 Pages

拨码开关

拨码开关

拨码开关

SILICON BIDIRECTIONAL THYRISTORS

文件：208.15 Kbytes Page：4 Pages