COMPUTER DIODE Switching

GENERAL PURPOSE DIFFUSED SILICON PLANAR DIODES

GENERAL PURPOSE DIFFUSED SILICON PLANAR DIODES ● BV 100V (MIN) @ 100 μA

Diode Switching 80V 0.15A 2-Pin DO-35

ULTRA FAST RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

ULTRA FAST RECTIFIERS

Features • AXIAL AND SURFACE MOUNT CONFIGURATIONS • HIGH VOLTAGE WITH ULTRA FAST RECOVERY TIME • VERY LOW SWITCHING LOSS AT HIGH TEMPERATURE • LOW CAPACITANCE • METALLURGICALLY BONDED • NON-CAVITY GLASS PACKAGE • SURFACE MOUNT DIODES THERMALLY MATCHED FOR USE ON CERAMIC PRINTED WIRING BOARD

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

ULTRA FAST RECTIFIERS

ULTRA FAST RECTIFIERS Note 1: Low Current Reverse Recovery Time Test Conditions IF = 0.5A, IRM = 1.0A, IR(REC) = 0.25A. Note 2: High Current Reverse Recovery Time Test Conditions IF = 2.0A, 100A/µs, MIL-STD-750, METHOD 4031, CONDITION D.

HYPER FAST RECOVERY RECTIFIER

FEATURES: ● Hyper Fast Recovery: 30 - 60 nsec maximum ● PIV up to 1200 Volts ● Low Reverse Leakage Current ● Hermetically Sealed ● Void Free Construction ● For High Efficiency Applications ● Typical Weight: 0.75 g (Axial Leaded); 0.45 g (SMS) ● TX, TXV, and Space Level Screening Available2

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

Power Rectifier, Ultrafast - Less Than 100ns

900 VOLT, 2.8 AMP, 50 NS HERMETIC RECTIFIER IN A MELF-B PACKAGE.\nElectrical Characteristics : (All parameters are at Tc = 25°C unless otherwise specified)RATINGSYMBOLMAXUNITSPeak Inverse VoltagePIV900VoltsMaximum Forward Voltage @TA = 25°C Vf1.7 @ 3VoltsMaximum DC Output Current (TC = 100°C)Io2.8Am

Rectifier Diode Switching 2-Pin 900V, 1.4A, 60ns E-MELF Bag

This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 1000 volts are hermet Surface mount series equivalent to the JEDEC registered 1N6626 to 1N6631 series\n Void less hermetically sealed glass package\n Extremely robust construction\n Triple-layer passivation\n Internal “Category I” Metallurgical bonds\n JAN, JANTX, and JANTXV available per MIL-PRF19500/590\n Further optio;

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

ULTRA FAST RECTIFIERS

Features • AXIAL AND SURFACE MOUNT CONFIGURATIONS • HIGH VOLTAGE WITH ULTRA FAST RECOVERY TIME • VERY LOW SWITCHING LOSS AT HIGH TEMPERATURE • LOW CAPACITANCE • METALLURGICALLY BONDED • NON-CAVITY GLASS PACKAGE • SURFACE MOUNT DIODES THERMALLY MATCHED FOR USE ON CERAMIC PRINTED WIRING BOARD

ULTRA FAST RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

VOIDLESS-HERMETICALLY-SEALED SURFACE MOUNT ULTRA FAST RECOVERY GLASS RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

HYPER FAST RECOVERY RECTIFIER

FEATURES: ● Hyper Fast Recovery: 30 - 60 nsec maximum ● PIV up to 1200 Volts ● Low Reverse Leakage Current ● Hermetically Sealed ● Void Free Construction ● For High Efficiency Applications ● Typical Weight: 0.75 g (Axial Leaded); 0.45 g (SMS) ● TX, TXV, and Space Level Screening Available2

ULTRA FAST RECTIFIERS

Features • AXIAL AND SURFACE MOUNT CONFIGURATIONS • HIGH VOLTAGE WITH ULTRA FAST RECOVERY TIME • VERY LOW SWITCHING LOSS AT HIGH TEMPERATURE • LOW CAPACITANCE • METALLURGICALLY BONDED • NON-CAVITY GLASS PACKAGE • SURFACE MOUNT DIODES THERMALLY MATCHED FOR USE ON CERAMIC PRINTED WIRING BOARD

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

ULTRA FAST RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

ULTRA FAST RECTIFIERS

ULTRA FAST RECTIFIERS Note 1: Low Current Reverse Recovery Time Test Conditions IF = 0.5A, IRM = 1.0A, IR(REC) = 0.25A. Note 2: High Current Reverse Recovery Time Test Conditions IF = 2.0A, 100A/µs, MIL-STD-750, METHOD 4031, CONDITION D.

HYPER FAST RECOVERY RECTIFIER

FEATURES: ● Hyper Fast Recovery: 30 - 60 nsec maximum ● PIV up to 1200 Volts ● Low Reverse Leakage Current ● Hermetically Sealed ● Void Free Construction ● For High Efficiency Applications ● Typical Weight: 0.75 g (Axial Leaded); 0.45 g (SMS) ● TX, TXV, and Space Level Screening Available2

HYPER FAST RECOVERY RECTIFIER

FEATURES: ● Hyper Fast Recovery: 30 - 60 nsec maximum ● PIV up to 1200 Volts ● Low Reverse Leakage Current ● Hermetically Sealed ● Void Free Construction ● For High Efficiency Applications ● Typical Weight: 0.75 g (Axial Leaded); 0.45 g (SMS) ● TX, TXV, and Space Level Screening Available2

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

Ultrafast Recovery Rectifier

• Hermetic, non-cavity glass package • Metallurgically bonded • Operating and Storage Temperature: -65oC to +175o

ULTRA FAST RECTIFIERS

Features • AXIAL AND SURFACE MOUNT CONFIGURATIONS • HIGH VOLTAGE WITH ULTRA FAST RECOVERY TIME • VERY LOW SWITCHING LOSS AT HIGH TEMPERATURE • LOW CAPACITANCE • METALLURGICALLY BONDED • NON-CAVITY GLASS PACKAGE • SURFACE MOUNT DIODES THERMALLY MATCHED FOR USE ON CERAMIC PRINTED WIRING BOARD

ULTRA FAST RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

VOIDLESS-HERMETICALLY-SEALED SURFACE MOUNT ULTRA FAST RECOVERY GLASS RECTIFIERS

DESCRIPTION This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/590 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working peak reverse voltages from 200 to 100

5 WATT ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT ZENER DIODES

• AVAILABLE IN JAN, JANTX, JANTXV, AND JANS PER MIL-PRF-19500/356 • 5 WATT ZENER DIODES • NON CAVITY CONSTRUCTION • METALLURGICALLY BONDED

5 WATT GLASS ZENER DIODES

5 WATT GLASS ZENER DIODES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

VOIDLESS-HERMETICALLY-SEALED Surface Mount 5 WATT GLASS ZENER

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT ZENER DIODES

• AVAILABLE IN JAN, JANTX, JANTXV, AND JANS PER MIL-PRF-19500/356 • 5 WATT ZENER DIODES • NON CAVITY CONSTRUCTION • METALLURGICALLY BONDED

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT ZENER DIODES

• AVAILABLE IN JAN, JANTX, JANTXV, AND JANS PER MIL-PRF-19500/356 • 5 WATT ZENER DIODES • NON CAVITY CONSTRUCTION • METALLURGICALLY BONDED

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

5 WATT GLASS ZENER DIODES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

VOIDLESS-HERMETICALLY-SEALED Surface Mount 5 WATT GLASS ZENER

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT ZENER DIODES

• AVAILABLE IN JAN, JANTX, JANTXV, AND JANS PER MIL-PRF-19500/356 • 5 WATT ZENER DIODES • NON CAVITY CONSTRUCTION • METALLURGICALLY BONDED

5 WATT ZENER DIODES

• AVAILABLE IN JAN, JANTX, JANTXV, AND JANS PER MIL-PRF-19500/356 • 5 WATT ZENER DIODES • NON CAVITY CONSTRUCTION • METALLURGICALLY BONDED

5 WATT ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using

5 WATT GLASS ZENER DIODES

5 WATT GLASS ZENER DIODES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.

5 WATT GLASS ZENER DIODES

DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using