SILICON 1.5 WATT ZENER DIODES

SILICON 1.5 WATT ZENER DIODES

DESCRIPTION The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They a

ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current

ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 240 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

ZENER DIODES

文件：2.01679 Mbytes Page：14 Pages

1.5 Watt ZENER DIODES(3.3V to 200V)

Features ■ 5 & 10 VOLTAGE TOLERANCES AVAILABLE ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

SILICON ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current

POWER DISSIPATION: 1.5W

Features ◇ Silicon planar power zener diodes ◇ No suffix indicates a ±20 tolerance on nominal Vz. SuffixA denotes a ±10,Suffix B denotes a ±5, Suffix C denotes a ±2,Suffix D denotes a ±1.

1.5 WATTS ZENER DIODES

1.5 WATTS ZENER DIODES 3.3 - 200 VOLTS

SILICON ZENER DIODES

SILICON ZENER DIODES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.

SILICON ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

SILICON 1.5 WATT ZENER DIODES

DESCRIPTION The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They a

1.5 Watt Zener Diode 11 to 200 Volts

Features • Glass Passivated Junction • Low Profile Package • Low Inductance • Built-in Strain Relief

Axial-Leaded 1.5 Watt Zener Diodes

DESCRIPTION The 1N5913BG-5956BG series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with a variety of tolerances available. They are also available in various military equivalent screening levels for high reliability. These glass encapsulated Zeners with a G

Axial Lead Axial Lead

Features ●Glass passivated chip ●Low leakage ●Built-in strain relief ●Low inductance ●High peak reverse power dissipation ●RoHS compliant ●For use in stabilizing and clipping circuits with high power rating

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE(VOLTAGE - 11 TO 200 Volts Power - 1.5 Watts)

VOLTAGE 3.3 to 200 Volts POWER 1.5 Watts FEATURES • Low profile package • Built-in strain relief • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Pb free product are available : 99 Sn can meet RoHSenvironment substance directive request

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE

Axial-Leaded 1.5 Watt Zener Diodes

DESCRIPTION The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They a

3 W DO??1 Surmetic TM 30 Zener Voltage Regulators

This is a complete series of 3 W Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial−lead, transfer−molded plastic package that offers protection in all common environmental condition

1.5 WATT SILICON ZENER DIODE

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● LOW ZENER IMPEDANCE ● EXCELLENT CLAMPING CAPABILITY MECHANICAL DATA ● CASE: MOLDED PLASTIC, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) ● TERMINALS: AXIAL LEADS SOLDERABLE PER MIL-STD-20

SILICON ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

Axial-Leaded 1.5 Watt diodes

Axial-Leaded 1.5 Watt diodes

Axial Lead Zener Diodes

VZ: 5.6 to 200 V PD: 1.5 W Features ● Glass passivated chip ● Low leakage ● Built-in strain relief ● Low inductance ● High peak reverse power dissipation ● Lead (Pb)-free component ● For use in stabilizing and clipping circuits with high power rating Mechanical Data ● Case: Molded p

1.5 Watt ZENER DIODES(3.3V to 200V)

Features ■ 5 & 10 VOLTAGE TOLERANCES AVAILABLE ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

3 W SILICON ZENER DIODES

3 W SILICON ZENER DIODES

GLASS PASSIVATED JUNCTION SILICON ZENER DIODES

VOLTAGE 3.3 to 200 Volts POWER 1.5 Watts FEATURES • Low profile package • Built-in strain relief • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Pb free product are available : 99 Sn can meet RoHSenvironment substance directive request

1.5W Zener Diodes

Features • Low Profile Package • 1.5W Power Dissipation • Built-in Strain Relief • Low Inductance • High Stability • Zener Voltage from 3.3V to 56V • RoHS Compliant

Zener Diodes 1N59 Series

FEATURES ●Ptot 1.5W ●Vz 3.3V-240V

1.5W ZENER DIODE

Glass Passivated Die Construction 1.5W Power Dissipation 3.3V – 200V Nominal Zener Voltage 5 Standard Vz Tolerance Low Inductance For Use in Voltage Regulator or Reference Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data

GLAS S PASSIVA TED JUNC TION S ILICON ZENER DIODE VO LTA GE - 1 1 T O 200 Vo lts

FEATURES ● Low profile package ● Built-in strain relief ● Glass passivated junction ● Low inductance ● Typical IR less than 1 £gA above 11V ● High temperature soldering : 260℃/10 seconds at terminals ● Plastic package has Underwriters Laboratory Flammability Classificati

1.5 Watts Axial Leaded Zener Diodes

Features ● Complete Voltage Range 3.3 to 200 Volts ● High reliability ● High peak reverse power dissipation ● Low leakage current

Zener Diode

■ Feature ● Pt 1.5W ● Vz 3.3V-240V Notes : 1. Zener Tolerance: ± 5 . 2. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10 of the dc zener current (IZT or IZK) is superimposed to IZT or IZK.。 3. The max zener current

SILICON ZENER DIODES

FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current

SILICON ZENER DIODES

VOLTAGE 3.3 to 200 Volts POWER 1.5 Watts FEATURES • Low profile package • Built-in strain relief • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Pb free product are available : 99 Sn can meet RoHSenvironment substance directive request

SILICON ZENER DIODE 1.5 WATT, 3.3 THRU 200 VOLTS

DESCRIPTION: The CENTRAL SEMICONDUCTOR 1N5913B series silicon Zener diode is a high quality voltage regulator designed for use in automotive, industrial, commercial, entertainment and computer applications.

1.5W SILICON ZENER DIODE

VOLTAGE RANGE 3.3 to 200 Volts FEATURES * Zener voltage 3.3V to 200V * Withstands large surge stresses

3 W DO??1 Surmetic TM 30 Zener Voltage Regulators

This is a complete series of 3 W Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial−lead, transfer−molded plastic package that offers protection in all common environmental condition

1.5 WATT SILICON ZENER DIODE

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● LOW ZENER IMPEDANCE ● EXCELLENT CLAMPING CAPABILITY ● LEAD FREE MECHANICAL DATA ● CASE: MOLDED PLASTIC, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) ● TERMINALS: AXIAL LEADS SOLDERABLE

Axial-Leaded 1.5 Watt Zener Diodes

DESCRIPTION The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They a

3 W DO??1 Surmetic TM 30 Zener Voltage Regulators

This is a complete series of 3 W Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial−lead, transfer−molded plastic package that offers protection in all common environmental condition

3 W DO??1 Surmetic TM 30 Zener Voltage Regulators

This is a complete series of 3 W Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial−lead, transfer−molded plastic package that offers protection in all common environmental condition

3 W DO-41 Surmetic 30 Zener Voltage Regulators

This is a 1N59xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial−lead, transfer−molded plastic package that offers protection in all common environmental conditions. Features • Zener

1.5W 24V Zener diode

文件：505.379 Kbytes Page：3 Pages

3W 24V Zener diode

文件：738.238 Kbytes Page：4 Pages

1.5 Watts Axial Leaded Zener Diodes

文件：422.798 Kbytes Page：2 Pages

SILICON ZENER DIODES

文件：95.56 Kbytes Page：2 Pages

封装/外壳：DO-204AL，DO-41，轴向 包装：卷带（TR） 描述：DIODE ZENER 24V 1.5W DO204AL 分立半导体产品 二极管 - 齐纳 - 单

封装/外壳：DO-204AL，DO-41，轴向 包装：卷带（TR） 描述：DIODE ZENER 24V 1.25W DO204AL 分立半导体产品 二极管 - 齐纳 - 单

ZENER DIODES

文件：53.8 Kbytes Page：1 Pages

GLASS PASSIVATED JUNCTION SILICON ZENER DIODES

文件：49.4 Kbytes Page：4 Pages

3 W DO-41 Surmetic 30 Zener Voltage Regulators

文件：194.19 Kbytes Page：8 Pages

METALLURGICALLY BONDED GLASS SURFACE MOUNT 1.5 WATT ZENERS

文件：191.98 Kbytes Page：3 Pages