5 WATT ZENER REGULATOR DIODES 3.3-200 VOLTS

5-Watt Surmetic 40 Silicon Zener Diodes

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE(VOLTAGE- 11 to 200 Volts Power - 5.0 Watts)

FEATURES • For surface mounted applications in order to optimize board space. • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Typical ID less than 1.0µA above 13V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O •

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE

VOLTAGE -11 TO 200 Volts Power -5.0 Watts FEA TURES Low profile package Built-in strain relief Glass passivated junction Low inductance Typical ID less than 1 A above 13V High temperature soldering : 260/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability

5 Watt Surmetic 40 Silicon Zener Diodes

5 Watt Surmetic 40 Silicon Zener Diodes ••• a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in an axial-lead, transfer-molded plastic package that offers prote

5W ZENER DIODE

Features • Voltage Range 8.2V - 200V • Glass Passivated Junction • 5W Steady State • High Surge Capability • ±5 Voltage Tolerance on Nominal VZ is Standard • 100 Tested

SILICON 5 WATT ZENER DIODES

DESCRIPTION The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zeners have moisture classificatio

5W SILICON ZENER DIODES

description 5W silicon Zener diodes. ■ VOLTAGE RANGE : 3.3V TO 200V ■ HERMETICALLY SEALED PLASTIC CASE ■ HIGH SURGE CAPABILITY (up to 180W @ 8.3ms)

5 Watt Surmetic 40 Zener Voltage Refulators

5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial lead, transfer−molded plastic package that offers

Zener silicon diodes

Maximum Power Dissipation: 5 W Nominal Z-voltage: 10 to 200 V Features • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 • Standard Zener voltage tolerance is graded to the international E 24(5) standard. Other voltage tolerance and higher Zener voltage on reque

5 Watt Surmetic TM 40 Zener Voltage Regulators

5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial lead, transfer−molded plastic package that offers

ZENER DIODES

POWER DISSIPATION: 5.0 W FEATURES ◇ Silicon planar power zener diodes ◇ For use in stabilizing and clipping curcuits with high power rating. ◇ Standard zener voltage tolerance is ±10. Add suffixB for ±5 tolerance. other zener voltage and tolerances are available upon request.

5.0W Zener Diodes

Features • Glass passivated junction • Complete voltage range 3.3 to 200V • High peak reverse power dissipation • High reliability • Low leakage current • RoHS Compliant

SILICON ZENER DIODES

VZ : 3.3 - 200 Volts PD : 5 Watts FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

SILICON ZENER DIODES

VZ : 3.3 - 200 Volts PD : 5 Watts FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

5W SILICON ZENER DIODE

VZ : 3.3 - 200 Volts PD : 5 Watts FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current

5 W SILICON ZENER DIODES

Descriptions Standard case is DO-15, D2A case is available upon request. For example: 1N5335B (D2A) means the case in D2A. Features • High peak reverse power dissipation • High reliability • Low leakage current

5 Watt ZENER DIODES

Features ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

Silicon-Power-Z-Diodes (non-planar technology)

• Maximum power dissipation 5 W • Nominal Z-voltage 8.7…200 V • Plastic case ~ DO-201 • Weight approx. 1 g • Plastic material has UL classification 94V-0 • Standard packaging taped in ammo pack see page 1

Zener silicon diodes

Maximum Power Dissipation: 5 W Nominal Z-voltage: 10 to 200 V Features • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 • Standard Zener voltage tolerance is graded to the international E 24(5) standard. Other voltage tolerance and higher Zener voltage on reque

5W Zener Doides

Features Zener voltage: 3.3V~200V High reliability High temperature soldering guaranteed: 260 °C/10 seconds,0.375”(9.5mm) lead length Mechanical Data Case: Molded plastic DO-15 Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denot

Silicon planar power zener diodes

POWER DISSIPATION: 5.0 W FEATURES ◇ Silicon planar power zener diodes ◇ For use in stabilizing and clipping curcuits with high power rating. ◇ Standard zener voltage tolerance is ±10. Add suffixB for ±5 tolerance. other zener voltage and tolerances are available upon request.

Silicon 5 Watt Zener Diodes

DESCRIPTION The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zeners have moisture classificatio

5 WATT ZENER DIODES

5 WATT ZENER DIODES

5 Watt Surmetic 40 Zener Voltage Regulators

5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial lead, transfer−molded plastic package that offers

Zener Diodes

■ Features ● Ptot 5.0W ● Vz 3.3V-200V ■ Applications ● Stabilizing Voltage

5 WATT SILICON ZENER DIODE

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● LOW ZENER IMPEDANCE ● EXCELLENT CLAMPING CAPABILITY

5Watts Axial Leaded Zener Diodes

Features ● Complete Voltage Range 5.1 to 200 Volts ● High peak reverse power dissipation ● High reliability ● Low leakage current Mechanical Data ● Case : DO-15 Molded plastic ● Epoxy : UL94V-0 rate flame retardant ● Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed

POWER DISSIPATION

POWER DISSIPATION: 5.0 W FEATURES ◇ Silicon planar power zener diodes ◇ For use in stabilizing and clipping curcuits with high power rating. ◇ Standard zener voltage tolerance is ±10. Add suffixB for ±5 tolerance. other zener voltage and tolerances are available upon request.

5W Zener Diode 5.1 to 200V

Features • Zener Voltage From 5.1V to 200V • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/RoHS Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Marking : Cathode band and type number • Halogen free available upon requ

5.0 WATTS ZENER DIODE EXCELLENT CLAMPING CAPABILITY

Features ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

5W ZENER DIODE

Features • Voltage Range 8.2V - 200V • Glass Passivated Junction • 5W Steady State • High Surge Capability • ±5 Voltage Tolerance on Nominal VZ is Standard • 100 Tested

5 Watt Zener Diode 5.1 to 200 Volts

POWER DISSIPATION: 5.0 W FEATURES ◇ Silicon planar power zener diodes ◇ For use in stabilizing and clipping curcuits with high power rating. ◇ Standard zener voltage tolerance is ±10. Add suffixB for ±5 tolerance. other zener voltage and tolerances are available upon request.

5 WATT SILICON ZENER DIODE

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● LOW ZENER IMPEDANCE ● EXCELLENT CLAMPING CAPABILITY

5.0W ZENER DIODE

Glass Passivated Die Construction 5.0W Power Dissipation 3.3V – 200V Nominal Zener Voltage 5% Standard Vz Tolerance Low Inductance For Use in Voltage Regulator or Reference Plastic Case Material has UL Flammability Classification Rating 94V-0

ZENER DIODES

FEATURES : * Complete Voltage Range 5.1 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current

Zener Diodes

Features •Zener voltage range: 3.3V to 200V •Surge rating of up to 180W @ 8.3mS

DIODE

5-WATT ZENER REGULATOR DIODES 3.3-200 VOLTS

AXIAL LEADED SILICON ZENER DIODES

文件：361.494 Kbytes Page：3 Pages

5W 180V TAIWAN SUNMATE SEMICONDUCTOR CO.,LIMITED

文件：360.87 Kbytes Page：3 Pages

封装/外壳：T-18，轴向 包装：卷带（TR） 描述：DIODE ZENER 180V 5W T18 分立半导体产品 二极管 - 齐纳 - 单

ZENER DIODES

文件：99.79 Kbytes Page：3 Pages

5 Watt Surmetic 40 Zener Voltage Regulators

文件：135.87 Kbytes Page：7 Pages

Zener Diodes

文件：131.84 Kbytes Page：2 Pages

Axial Lead Zener Diodes

文件：255.97 Kbytes Page：3 Pages

Zener Diode

文件：2.31693 Mbytes Page：5 Pages

ZENER DIODE

文件：204.81 Kbytes Page：3 Pages

Design Considerations for Clamping Networks for Very High Voltage Monolithic Off-line PWM Controllers

文件：149.42 Kbytes Page：8 Pages

封装/外壳：T-18，轴向 包装：卷带（TR）剪切带（CT） 描述：DIODE ZENER 180V 5W AXIAL 分立半导体产品 二极管 - 齐纳 - 单

5 W Glass Passivated Zener Diode

文件：60.85 Kbytes Page：3 Pages

Zener Diodes

文件：2.71208 Mbytes Page：5 Pages

Zener Diodes

文件：131.57 Kbytes Page：2 Pages

Silicon-Power-Zener Diodes

文件：91.26 Kbytes Page：2 Pages

Zener silicon diodes

文件：44.85 Kbytes Page：1 Pages

Silicon-Power-Zener Diodes (non-planar technology)

文件：85.97 Kbytes Page：2 Pages

5W ZENER DIODE

Features • Voltage Range 8.2V - 200V • Glass Passivated Junction • 5W Steady State • High Surge Capability • ±5 Voltage Tolerance on Nominal VZ is Standard • 100 Tested

5 Watt Surmetic 40 Silicon Zener Diodes

5 Watt Surmetic 40 Silicon Zener Diodes ••• a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in an axial-lead, transfer-molded plastic package that offers prote

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE(VOLTAGE- 11 to 200 Volts Power - 5.0 Watts)

FEATURES • For surface mounted applications in order to optimize board space. • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Typical ID less than 1.0µA above 13V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O •

5 WATT ZENER REGULATOR DIODES 3.3-200 VOLTS

5-Watt Surmetic 40 Silicon Zener Diodes

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE

VOLTAGE -11 TO 200 Volts Power -5.0 Watts FEA TURES Low profile package Built-in strain relief Glass passivated junction Low inductance Typical ID less than 1 A above 13V High temperature soldering : 260/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability

5 Watt Zener Diode 11 to 200 Volts

Features ● Built Strain Relief ● Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 ● For Available Tolerances—See Note 1 ● Marking : 1N5348~1N5388 part number and Cathode Band