5W Zener Diode

Features:  High Power Rating  Sharp Reverse Characteristics  Low Reverse Current Levels  High Reliability tested grades.

5W 22V 2% Zener Diode

This Zener Diode is packaged in DIGI V, which has a power dissipation of 5W.\n\n Available as High Reliability device as per MIL-PRF-19500 indicate –HR suffix after the part number. Contact for -HR flow. Add \"PBF\" suffix for Pb-free lead finish.

Zener Diodes

The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zeners have moisture classification of Level 1 wi

封装/外壳：T-18，轴向 包装：卷带（TR） 描述：DIODE ZENER 22V 5W T18 分立半导体产品 二极管 - 齐纳 - 单

稳压二极管 Zener Voltage Regulator Diode

封装/外壳：T-18，轴向 包装：卷带（TR） 描述：DIODE ZENER 22V 5W T18 分立半导体产品 二极管 - 齐纳 - 单

5 Watt Surmetic 40 Silicon Zener Diodes

5 Watt Surmetic 40 Silicon Zener Diodes ••• a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in an axial-lead, transfer-molded plastic package that offers prote

5W ZENER DIODE

Features • Voltage Range 8.2V - 200V • Glass Passivated Junction • 5W Steady State • High Surge Capability • ±5 Voltage Tolerance on Nominal VZ is Standard • 100 Tested

5 WATT ZENER REGULATOR DIODES 3.3-200 VOLTS

5-Watt Surmetic 40 Silicon Zener Diodes

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE(VOLTAGE- 11 to 200 Volts Power - 5.0 Watts)

FEATURES • For surface mounted applications in order to optimize board space. • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Typical ID less than 1.0µA above 13V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O •

GLASS PASSIVATED JUNCTION SILICON ZENER DIODE

VOLTAGE -11 TO 200 Volts Power -5.0 Watts FEA TURES Low profile package Built-in strain relief Glass passivated junction Low inductance Typical ID less than 1 A above 13V High temperature soldering : 260/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability