Silicon Z-Diodes

Features ● Very sharp reverse characteristic ● Very high stability ● Low reverse current level ● VZ–tolerance ± 5 Applications     Voltage stabilization

Absolute Maximum Ratings

Zener Diodes

Zeners

Zener Diodes

500mW EPITAXIAL ZENER DIODE

Features • 500mW Power Dissipation • High Stability • Surface Mount Equivalents Available • Hermetic Package • VZ - Tolerance ±5 • Lead Free Finish, RoHS Compliant (Note 2)

TECHNICAL SPECIFICATIONS OF GLASS SILICON ZENER DIODES

FEATURES * Voltage Range:2.4V to 39V * Double slug type construction

Zener diode

Features 1. High reliability 2. Very sharp reverse characteristic 3. Low reverse current level 4. VZ-tolerance± 5 Applications Voltage stabilization

500mw Epitaxial Zener Diode

Nominal Zener Voltage: 2.4 to 75V Power Dissipation: 0.5W Features - 500mW Power Dissipation - 2.4V - 75V Nominal Zener Voltage - Low Noise - Surface Mount Equivalents Available - Hermetic Package - VZ - Tolerance 5

Surface Mount Zener Diodes

Features: * High Rliability * Very Sharp Reverse Characteristic * Low Reverse Current Level * VZ-Tolerance ± 5

SILICON PLANAR ZENER DIODES

FEATURES The zeners with glass passivated junction in the hermetically sealed glass package with double studs, provides excellent stability, reliability and better power dissipation.

SILICON ZENER DIODES

FEATURES • Planar Die construction • 500mW Power Dissipation • Ideally Suited for Automated Assembly Processes • Pb free product : Sn can meet RoHS environment substance directive request

1/2 Watt ZENER DIODES

Features ■ 5 & 10 VOLTAGE TOLERANCES AVAILABLE ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

0.5W Hermetically Sealed Glass Zener Diodes

FEATURES - Zener voltage range 2.4 to 56 volts - DO-35 package - Through-hole device type mounting - Hemetically sealed glass - Compression bonded construction - All extermal surfaces are corrosion resistant and leads are readily solderable - ROHS complaint - Solder hot dip Tin(Sn) lead fi

1/2 Watt ZENER DIODES

Features ■ 5 & 10 VOLTAGE TOLERANCES AVAILABLE ■ WIDE VOLTAGE RANGE ■ MEETS UL SPECIFICATION 94V-0

ZENER DIODES

1N52 SERIES ZENER DIODES 1N5221B Through 1N5272B ELECTRICAL CHARACTERISTICS (T A =25°C)unless otherwise noted.Based on dc measurements at thermal equillibrium;lead length=3/8”;thermal resistance of heat sink=30°C/W VFmax=1.1V @ I F=200mA for all types(T A = 25°C VFmax=1.1V@ I F=200mA)

ZENER DIODES

FEATURES ◇ Silicon planar power zener diodes ◇ Standard Zener voltage tolerance is ±5. With a B suffix. Other tolerances are available upon request.

Zener diode

■ Features ● Ptot 500mW ● Vz 2.4V-68V ■ Applications ● Stabilizing Voltage

ZENER DIODES

Features • Planar Die construction • 500mW Power Dissipation • Standard Zener Voltage Tolerance is ± 5 • Ideally Suited for Automated Assembly Processes • RoHS compliant

500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators

Specification Features: ■ Zener Voltage Range = 2.4V to 200V ■ ESD Rating of Class 3 (>6 KV) per Human Body Model ■ DO-35 Package (DO-204AH) ■ Double Slug Type Construction ■ Metallurgical Bonded Construction ■ RoHS Compliant ■ Solder Hot Dip Tin (Sn) Lead Finish)

SILICON PLANAR ZENER DIODES

FEATURES • Voltage Range: 2.7V to 110V • Double siug type construction

Zener diode

Features 1. High reliability 2. Very sharp reverse characteristic 3. Low reverse current level 4. Vz-tolerance*5 Applications Voltage stabilization

ZENER DIODES

VZ : 2.4 - 75 V PD : 500 mW FEATURES : • Silicon planar power zener diodes. • Standard zener voltage tolerance is ± 10. • Other tolerances are available upon request. • These diodes are also available in MiniMELF case with the type designation ZMM5221 ... ZMM5267 • Pb / RoHS Free

High stability and high reliability

Features • Low reverse leakage • Low zener impedance • Maximum power dissipation of 500 mW • High stability and high reliability • Lead and body according with RoHS standard

ZENER DIODES

FEATURE ♦ Low zener impedance ♦ Low regulation factor ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 260 °C/10S/9.5mm lead length at 5 lbs tension

500mW EPITAXIAL ZENER DIODE

FEATURES • Standards zener voltage tolerance is 20. Add suffix A for 10 tolerance and suffix B for 5 tolerance other tolerance, non standards and higher zener voltage upon request.

Zener Diodes

■ Features ● Ptot 500mW ● Vz 2.4V-68V ■ Applications ● Stabilizing Voltage

GLASS ZENER DIODES 500 MILLIWATTS 2.4-200 VOLTS

FEATURES • 2.4 THRU 200 VOLTS • COMPACT PACKAGE

Absolute Maximum Ratings

Zener Diodes

ZENER DIODE 2.4 VOLTS THRU 200VOLTS 500mL, 5 TOLERANCE

DESCRIPTION: The CENTRAL SEMICONDUCTOR 1N5221B series silicon Zener diodes are highly reliable voltage regulators designed for use in industrial, commercial, entertainment and computer applications.

500mW DO-35 GLASS

500 mW DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 500 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes This is a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior cap

ZENER DIODES

FEATURES : • Silicon planar power zener diodes. • Standard zener voltage tolerance is ± 5. • Other tolerances are available upon request. • These diodes are also available in MiniMELF case with the type designation ZMM5221B ... ZMM5267B • Pb / RoHS Free

LEADED (THRU-HOLE) Zener Diodes

400mW GLASS BODY ZENER DIODE 500mW GLASS BODY ZENER DIODE

Zener diode

Features 1. High reliability 2. Very sharp reverse characteristic 3. Low reverse current level 4. VZ-tolerance ± 5 Applications Voltage stabilization

Silicon Z?밆iodes

Features ● Plannar Die constuction ● 500mW Power Dissipation ● Ideally Suited for Automated Assembly Processes ● VZ–tolerance ± 5 Applications Voltage stabilization

Zener Diodes

Zener Diodes Tolerance = 5 DO-35 Glass case COLOR BAND DENOTES CATHODE

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

500 mW Zener Diode 2.4 to 75 Volts

Features • Wide Voltage Range Available • Glass Package • High Temp Soldering: 260°C for 10 Seconds At Terminals • Marking : Cathode band and type number • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Moisture Sensitivity: Level 1

Zener Diodes

Zener Diodes Tolerance = 5 DO-35 Glass case COLOR BAND DENOTES CATHODE

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

EPITAXIAL ZENER DIODE

FEATURES ● Average Power Dissipation ● Zener Voltage ● Withstand Hard Envirnment ● Plastic Mold Package ● Can be use for an automatic mounting machine

Zener Diodes

Features ◇ Silicon planar power zener diodes ◇ Standard Zener voltage tolerance is ±5. With a B suffix. Other tolerances are available upon request.)

Vishay Semiconductors

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

ZENER DIODES

FEATURE ♦ Low zener impedance ♦ Low regulation factor ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 260 °C/10S/9.5mm lead length at 5 lbs tension

ZENER DIODES

ZENER DIODES Zener Voltage : 2.4 - 200V Peak Pulse Power : 500mW

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators

Specification Features • Zener Voltage Range = 2.4 V to 200 V • ESD Rating of Class 3 (>16 KV) per Human Body Model • DO-35 Package (DO-204AH) • Double Slug Type Construction • Metallurgical Bonding

Silicon Z?밆iodes

Features ● Very sharp reverse characteristic ● Very high stability ● Low reverse current level ● VZ–tolerance ± 5 Applications Voltage stabilization

Zener Diode Die

The CPZ28X silicon Zener diode series is ideal for all types of commercial, industrial, entertainment, and computer applications. The Zener voltage tolerance is ±5. See packing options for ordering information. MECHANICAL SPECIFICATIONS: Die Size 13 x 13 MILS Die Thickness 5.5 MILS An

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

ZENER DIODES

Features Low zener impedance Low regulation factor Glass passivated junction High temperature soldering guaranteed: 260 C/10S/9.5mm lead length at 5 lbs tension

500mW ZENER DIODE

Planar Die Construction 500mW Power Dissipation 2.4V – 47V Nominal Zener Voltage 5% Standard Vz Tolerance Low Inductance For Use in Voltage Regulator or Reference Plastic Case Material has UL Flammability Classification Rating 94V-0

GLASS SILICON ZENER DI0DES

FEATURES • Voltage Range: 2.4V to 75V • Standard Zener Voltage tolerance ± 5% • (2% Zener tolerance available)

ZENER DIODES

Features 500mW Power Dissipation High Stability Low Noise Surface Mount Equivalents Available Hermetic Package

ZENER DIODES

FEATURE ♦ Low zener impedance ♦ Low regulation factor ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 260 °C/10S/9.5mm lead length at 5 lbs tension

Low zener impedance

FEATURE ♦ Low zener impedance ♦ Low regulation factor ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 260 °C/10S/9.5mm lead length at 5 lbs tension

Small Signal Zener Diodes

FEATURES • Silicon planar power Zener diodes • Standard Zener voltage tolerance is ± 5 with    a “B” suffix in the ordering code (e.g.: 1N5221B),    suffix “C” is ± 2 tolerance • These diodes are also available in MiniMELF    case with the type designation TZM5221 to    TZM5267, SOT-23 ca

0.5W 24V Zener diode

文件：326.745 Kbytes Page：2 Pages

AXIAL LEADED SILICON ZENER DIODES

文件：326.54 Kbytes Page：2 Pages

500 mW , DO-35 Zener Diodes

文件：122.6 Kbytes Page：2 Pages

Silicon Planar Zener Diodes

文件：88.14 Kbytes Page：3 Pages