Zener Diode Single 2-Pin 10V, 2%, 500mW DO-35 Bag

The 1N4678-1 thru 1N4717-1 series of 0.5 watt Zener voltage regulators provides a selection from 1.8 to 43 volts in standard 5% tolerances as well as tighter tolerances. These axial leaded glass DO-35 Zeners are available with an internal metallurgical bond similar to military requirements for s JEDEC registered 1N4678 thru 1N4717 series.\n Internal metallurgical bond.\n Tighter voltage tolerances of 2% and 1% are available. \nUp-screening available in reference to MIL-PRF-19500. (See part nomenclature for all available options). \nRoHS compliant devices available (commercial grade ;

包装：散装 描述：ZENER DIODE 分立半导体产品 二极管 - 齐纳 - 单

SILICON 250 mW ZENER DIODES

DESCRIPTION The 1N4678 thru 1N4717 series of 0.5 watt Zener Voltage Regulators provides a selection from 1.8 to 43 volts in standard 5 tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-7 Zeners also have an internal-m

Silicon Epitaxial Planar Z-Diodes

Features Zener voltage specified at 50
A Maximum delta VZ given from 10
A to 100
A Very high stability Low noise Applications Voltage stabilization

50 uA, LOW OPERATING CURRENT, ZENER DIODES

• 50 µA, LOW OPERATING CURRENT, ZENER DIODES • DOUBLE PLUG CONSTRUCTION • METALLURGICALLY BONDED MAXIMUM RATINGS Operating Temperature: -65°C to +175°C Storage Temperature: -65°C to +175°C Power Dissipation: 500mW @ +50°C DC Power Derating: 4 mW / °C above +50°C Forward V

ZENER DIODES

FEATURES ♦ Silicon Planar Zener Diodes ♦ Standard Zener voltage tolerance is ± 5. Other tolerances are available upon request. ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375” (9.5mm) lead length. ♦ These diodes are also available in SOD-123 case with the type designation

LOW LEVEL ZENER DIODES ULTRA-LOW CURRENT: 50 關A - LOW LEAKAGE

LOW LEVEL ZENER DIODES ULTRA-LOW CURRENT: 50 µA - LOW LEAKAGE