Tubular Vitreous Enamelled Wirewound Resistors

General Information Vitreous enamelled wirewound resistors are capable of withstanding a higher dissipation size for size, than any other protected type; this is attributable to the higher operating temperature which the wire and enamel can withstand. Vitreous enamel provides exceptionally good p

Inherent reliability

General Information Vitreous enamelled wirewound resistors are capable of withstanding a higher dissipation size for size, than any other protected type; this is attributable to the higher operating temperature which the wire and enamel can withstand. Vitreous enamel provides exceptionally good p

TaNFilm® Precision DIP Network Commercial and MIL Qualified

Inherent reliability MIL-PRF-83401 qualified Custom configuration available Bonded leads not susceptible to solder reflow problems Absolute tolerance to ±0.1% / ratio tolerance to ±0.05% Absolute TCR to ±15ppm/°C / ratio tracking to ±5ppm/°C

WIRE & CABLE TERMINATION

文件：3.92843 Mbytes Page：50 Pages

包装：散装 描述：SILVER 1.88\ 胶带，粘合剂，材料 胶带

描述：POWER SUPPLY 1-16V 60A SWITCH DC 测试与计量 设备 - 电源（测试，工作台）

OBSOLETE Elliptical Vitreous Enamelled Wirewound Resistor

3M??Value Duct Tape 1900

文件：141.04 Kbytes Page：5 Pages

TaNFilm짰 Precision DIP Network Commercial and MIL Qualified

文件：489.68 Kbytes Page：3 Pages

TaNFilm® Precision DIP Network Commercial and MIL Qualified

Inherent reliability MIL-PRF-83401 qualified Custom configuration available Bonded leads not susceptible to solder reflow problems Absolute tolerance to ±0.1% / ratio tolerance to ±0.05% Absolute TCR to ±15ppm/°C / ratio tracking to ±5ppm/°C

Time and light control Analogue time switches

Description - Analogue time switch - 1 channel - Weekly program - With power reserve - 84 switching segments - Quartz controlled - Shortest switching time: 2 hours - Screw terminals - Manual switch with 3 positions: Permanent ON/AUTO/continuous OFF

VPX Power and Ground

Features ■■ Compliant to the latest VITA 46 / 65 specifications ■■ Power and ground only backplane for simple and lowcost development ■■ 3.3V, 5V, and 12V power ■■ P0-P6 pins are user-defined ■■ NVMRO, SYSRESET#, SYSCON# and maskable reset are supported

3U 6-SLOT OpenVPX BACKPLANE

FEATURES ■■ Compliant to the VITA 65 Standard ■■ Uses the rugged 3U-160 Eurocard form factor ■■ High-speed EPT Velox connector ■■ Provides built in ESD ground protection in every slot

VPX Power and Ground Only

Features ■ Compliant to VITA 46 mechanical specifications ■ 3.3V, 5V, 12V, 3.3V_AUX, +12V_AUX, and -12V_AUX power ■ P0-P6 pins are user-defined ■ NVMRO, SYSRESET#, SYSCON# and maskable reset are supported

VPX Power and Ground

Features ■■ Compliant to the latest VITA 46 / 65 specifications ■■ Power and ground only backplane for simple and lowcost development ■■ 3.3V, 5V, and 12V power ■■ P0-P6 pins are user-defined ■■ NVMRO, SYSRESET#, SYSCON# and maskable reset are supported

VPX Power and Ground Only

Features ■ Compliant to VITA 46 mechanical specifications ■ 3.3V, 5V, 12V, 3.3V_AUX, +12V_AUX, and -12V_AUX power ■ P0-P6 pins are user-defined ■ NVMRO, SYSRESET#, SYSCON# and maskable reset are supported

System 4-70

Description Cable Knife System

Standard Quick-Disconnect Terminals

Description: Avikrimp Quick Disconnect, Male, for 18-22 (0.80-0.35mm²), Box, Tab 4.75 x 0.51mm

Hand Crimp Tool

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description Hand Crimp Tool Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Name N/A Tool Type Hand Crimp T

Hand Crimp Tool

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description Hand Crimp Tool Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Name N/A Tool Type Hand Crimp T

Standard Quick-Disconnect Terminals

Description: Avikrimp Quick Disconnect, Male, for 18-22 (0.80-0.35mm²), Box, Tab 4.75 x 0.51mm

Hand Crimp Tool

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description Hand Crimp Tool Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Name N/A Tool Type Hand Crimp T

Hand Crimp Tool

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description Hand Crimp Tool Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Name N/A Tool Type Hand Crimp T

Hand Crimp Tool

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description Hand Crimp Tool Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Name N/A Tool Type Hand Crimp T

Wet Tantalum SMD Capacitors, Tantalum Metal Case with Glass-to-Tantalum Hermetic Seal, DLA Approved

• Enhanced performance, high reliability design • SMD, standard tin / lead (Sn / Pb) • Mounting: surface-mount • Increased thermal shock capability of 300 cycles • Designed for the avionics and aerospace applications

Wet Tantalum SMD Capacitors, Tantalum Metal Case with Glass-to-Tantalum Hermetic Seal, DLA Approved

• Enhanced performance, high reliability design • SMD, standard tin / lead (Sn / Pb) • Mounting: surface-mount • Increased thermal shock capability of 300 cycles • Designed for the avionics and aerospace applications

Wet Tantalum SMD Capacitors, Tantalum Metal Case with Glass-to-Tantalum Hermetic Seal, DLA Approved

• Enhanced performance, high reliability design • SMD, standard tin / lead (Sn / Pb) • Mounting: surface-mount • Increased thermal shock capability of 300 cycles • Designed for the avionics and aerospace applications

Wet Tantalum SMD Capacitors, Tantalum Metal Case with Glass-to-Tantalum Hermetic Seal, DLA Approved

• Enhanced performance, high reliability design • SMD, standard tin / lead (Sn / Pb) • Mounting: surface-mount • Increased thermal shock capability of 300 cycles • Designed for the avionics and aerospace applications

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Full Insulated Quick Disconnect Terminals, for 22-18 AWG with Insulation Diameter no greater than 3.175mm MAX Comments Type RHT Function Crimp G

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Avikrimp Female Fully Insulated Quick Disconnect Terminals, 16-14 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More De

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments ServiceGrade Hand Tool 640160037; Type RHT Function Crimp Geographic Area Global Level of Automation Ma

ServiceGrade Hand Crimp Tool - Ratchet

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description ServiceGrade Hand Crimp Tool - Ratchet Comments ServiceGrade crimp hand tools are low cost ratcheting hand tools used in field repair for a limited number of terminations. If a high quality tool

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab4.75mm (.187) x 0.51mm (.020)

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab 4.75mm (.187) x 0.51mm (.020)

InsulKrimp??Quick Disconnect

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 4.75mm (.187) x 0.51mm (.020)

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Continuous MoldedStrip, Tab 4.75mm (.187) x 0.51mm

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Continuous Molded Strip, Tab 4.75mm (.187) x 0.51mm (.020)

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab4.75mm (.187) x 0.51mm (.020)

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab 4.75mm (.187) x 0.51mm (.020)

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 4.75mm(.187) x 0.81mm (.032)

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 4.75mm (.187) x 0.81mm (.032)

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab4.75mm (.187) x 0.81mm (.032)

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab 4.75mm (.187) x 0.81mm (.032)

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 4.75mm(.187

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 4.75mm (.187) x 0.81mm (.032)

PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG

General Status Active Category Crimp Presses and Crimp Hand Tools Series 207129 Description PremiumGrade Hand Crimp Tool for Insulkrimp Quick Disconnect Terminals, 22-10 AWG Comments Type RHT Function Crimp Geographic Area Global Level of Automation Manual More Detailed Tech Informatio

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab4.75mm (.187) x 0.81mm (.032)

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Mylar Tape, Tab 4.75mm (.187) x 0.81mm (.032)

InsulKrimp??Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 2.79mm

Description: InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35), Box, Tab 2.79mm (.110) x 0.51mm (.020)