丝印代码：1473；SN65HVD147x 3.3-V Full-Duplex RS-485 Transceivers with ±16-kV IEC ESD

1 Features 1• 1/8 Unit-Load Options Available – Up to 256 Nodes on the Bus • Bus I/O Protection – > ±30 kV HBM protection – > ±16 kV IEC61000-4-2 Contact Discharge – > ±4 kV IEC61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range: –40°C to 125°C • Large Receiver Hysteres

丝印代码：1473；SN65HVD147x 3.3-V Full-Duplex RS-485 Transceivers with ±16-kV IEC ESD

1 Features 1• 1/8 Unit-Load Options Available – Up to 256 Nodes on the Bus • Bus I/O Protection – > ±30 kV HBM protection – > ±16 kV IEC61000-4-2 Contact Discharge – > ±4 kV IEC61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range: –40°C to 125°C • Large Receiver Hysteres

丝印代码：1473；SN65HVD147x 3.3-V Full-Duplex RS-485 Transceivers with ±16-kV IEC ESD

1 Features 1• 1/8 Unit-Load Options Available – Up to 256 Nodes on the Bus • Bus I/O Protection – > ±30 kV HBM protection – > ±16 kV IEC61000-4-2 Contact Discharge – > ±4 kV IEC61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range: –40°C to 125°C • Large Receiver Hysteres

丝印代码：1473；SN65HVD147x 3.3-V Full-Duplex RS-485 Transceivers with ±16-kV IEC ESD

1 Features 1• 1/8 Unit-Load Options Available – Up to 256 Nodes on the Bus • Bus I/O Protection – > ±30 kV HBM protection – > ±16 kV IEC61000-4-2 Contact Discharge – > ±4 kV IEC61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range: –40°C to 125°C • Large Receiver Hysteres

High Power, N or SMK Connectors

文件：522.28 Kbytes Page：1 Pages

包装：散装 描述：CONN PIN RCPT .032-.046 KNURL 连接器，互连器件 PC 引脚插座，插座连接器

连接器附件

raaco Assortment Boxes

Assorter Environmentally-friendly, made from recyclable materials Assorter is the only one of our 3 assortment boxes, which is available with fixed compartments. Assorter is a system designed and created specifically for practical sorting. Assorter was developed according to DFD guidelines

M23-12P2N129003S - Coupler connector

M23, Coupler connector, series: M23 PRO, straight, shielded: yes, for standard and ONECLICK fast locking system, No. of pos.: 12, Direction of rotation: Counter direction, contact connection type: Pin, Solder connection, cable diameter range: 6 mm ... 10 mm, coding: N, Item is lead-free in acco

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

Rectangular Connector Hoods & Bases

TE Internal Description: H10B-SDR-BO-PG16 Features Product Type Features Product Size 4 Hood & Base Connector Product Type Base Housing Sealable Yes Body Features Material Die Cast Aluminum Cable Entry Location Side Mechanical Attachment Locking Device Location Housing Screw & Hole Th

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

AMP SUPERSEAL Connectors

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

Micro-MaTch | Micro-MaTch Industrial

Features Product Type Features Product Type Cable Assembly Product Designation Patch Cord Cable Assembly Category Industry Standard Pluggable I/O Cable Assembly Type MOW to MOW Pluggable /O Cable Assembly Shielded No Pluggable I/O Cable Assembly Connector Type (End A) Male-On-Wire Pluggabl

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

AMP SUPERSEAL Connectors

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR CAP HOUSING 26POS. ASSY

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR CAP HOUSING 26POS. ASSY

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

SUPER SEAL CONNECTOR CAP HOUSING 26POS. ASSY

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

REL-SR- 24DC/2X21/FG X - Safety relays

Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 changeover contacts. The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact

FL SWITCH 1104-4POE REG - Industrial Ethernet Switch

Unmanaged Switch 1000 REG, 4 RJ45 ports 10/100/1000 Mbps, REG design in accordance with DIN 43880

FL SWITCH 1108 REG - Industrial Ethernet Switch

Unmanaged Switch 1000 REG, 8 RJ45 port 10/100/1000 Mbps, REG design in accordance with DIN 43880

AMP SUPERSEAL Connectors

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

AMP SUPERSEAL Connectors

SCOPE This specification applies to the SUPER SEAL Connector. APPLIED STANDARD The following standards are applied as a part of this specification sheet. (1) JIS (Japanese Industrial Standards) • JIS D0203: Wet-Proof & Water-Proof Test Method Automobile Parts • JIS Z8901: Dusts a

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

MULTILOCK Connector System

Features  Contacts are spaced at 2.5 mm centerline.  Connectors are easy to handle.  Connectors are consisted of plug housings, receptacle contacts for wire termination, and cap housing assemblies for horizontal and vertical mountings on PC boards.  The contacting point of a recept

AT1108

Description 30W LED Track Mounted spotlight - 55o Beam - White - Cool white

AT1108

Description 30W LED Track Mounted spotlight - 55o Beam - Black - Warm white

AT1108

Description 20W LED Track Mounted spotlight - 55o Beam - White - Warm white

AT1108

Description 20W LED Track Mounted spotlight - 55o Beam - White - Cool white

AT1108

Description 20W LED Track Mounted spotlight - 55o Beam - Black - Warm white

AT1107

Description 2 x 10W LED Dimmable Adj. Spotlights c/w 1m Track Pack - WH/60deg/WW

AT1107

Description 2 x 10W LED Dimmable Adj. Spotlights c/w 1m Track Pack - WH/60deg/CW

AT1108

Description 12W LED Track Mounted spotlight - 55o Beam - Black - Warm white

AT1108

Description 12W LED Track Mounted spotlight - 55o Beam - Black - Cool white

AT1107

Description 10W LED Dimmable Track Mounted Spotlight - WH/60deg/WW

AT1107

Description 10W LED Dimmable Track Mounted Spotlight - BL/60deg/CW

AT1107

Description 10W LED Dimmable Track Mounted Spotlight - BL/60deg/WW

AT1108

Description 30W LED Track Mounted spotlight - 55o Beam - White - Warm white

Bendable Joiner

Description 3 Wire - Bendable Joiner - White

DDR1&DDR2 SODIMM SOCKET 0.6MM PITCH 200POS STANDARD PROFILE STANDARD TYPE

文件：389.46 Kbytes Page：4 Pages

DDR1&DDR2 SODIMM SOCKET 0.6MM PITCH 200POS STANDARD PROFILE STANDARD TYPE

文件：389.46 Kbytes Page：4 Pages

包装：卷带（TR）剪切带（CT） 描述：CONN SKT SODIMM 200POS R/A SMD 连接器，互连器件 直列式模块插座