Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 16 (19/.0117) AWG Tinned Copper 0.059 b) Insulation 0.032 Wall, Nom. PVC 0.123 (1) Color Code Alpha Wire Color Code F Cond Color Cond Color Cond Color 1 BLACK 5 ORANGE 9 GREEN/BLACK 2 WHITE 6 BLUE 10 ORANGE/BLACK 3 RED 7

Heyco® Liquid Tight Strain Relief Bushings

The Ultimate in Snap-In Strain Relief Protection Snap-in, Low Profile Design allows for Pre-assembled Cables • These low profile co-molded nylon and elastomer parts function as a Liquid Tight Strain Relief with a cable. • cULus approved under UL 514B. • Low profile design: height above pan

Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 16 (19/.0117) AWG Tinned Copper 0.059 b) Insulation 0.032 Wall, Nom. PVC 0.123 (1) Color Code Alpha Wire Color Code F Cond Color Cond Color Cond Color 1 BLACK 5 ORANGE 9 GREEN/BLACK 2 WHITE 6 BLUE 10 ORANGE/BLACK 3 RED 7

ScotchPad??Premium Hang Tabs

文件：336.11 Kbytes Page：4 Pages

包装：散装 描述：BATT HOLDER COIN 12MM 1 CELL SMD 电池产品 电池座，电池夹，电池触头

Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 16 (19/.0117) AWG Tinned Copper 0.059 b) Insulation 0.032 Wall, Nom. PVC 0.123 (1) Color Code Alpha Wire Color Code F Cond Color Cond Color Cond Color 1 BLACK 5 ORANGE 9 GREEN/BLACK 2 WHITE 6 BLUE 10 ORANGE/BLACK 3 RED 7

Diode Laser System

FEATURES & BENEFITS • Compact and modular OEM design • Superior beam quality • Minimal laser output RMS noise • Complete CDRH safety features for scientific and laboratory use • TEC temperature-stabilized and conductively cooled through baseplate • Analog and digital modulation • USB and

ICS25-C122X12-5015 - Upper housing part

DIN rail housing, Upper part, closed, width: 25 mm, height: 122.5 mm, depth: 14.35 mm, color: blue (similar RAL 5015)

ICS25-TL100X12-5015 - Upper housing part

DIN rail housing, Upper part, with transparent hinged cover, width: 25 mm, height: 101 mm, depth: 14.35 mm, color: blue (similar RAL 5015)

ICS25-C100X12-5015 - Upper housing part

DIN rail housing, Upper part, closed, width: 25 mm, height: 100 mm, depth: 14.35 mm, color: blue (similar RAL 5015)

Diode Laser System

FEATURES & BENEFITS • Compact and modular OEM design • Superior beam quality • Minimal laser output RMS noise • Complete CDRH safety features for scientific and laboratory use • TEC temperature-stabilized and conductively cooled through baseplate • Analog and digital modulation • USB and

ICS20-F22S-5015 - Connection plate

DIN rail housing, ICS filler, closed, width: 20 mm, height: 7.25 mm, depth: 22.4 mm, color: blue (similar RAL 5015)

TBUS8-25,0-PPPPPPPS-9005 - DIN rail bus connectors

DIN rail connector, color: black, nominal current: 6 A, 4 A (parallel contacts) (Serial contacts), rated voltage (III/2): 32 V, number of positions: 8, product range: TBUS8-25.., pitch: 2.54 mm, mounting: DIN rail mounting, locking: without, mounting method: without, type of packaging: packed i

TBUS8-25,0-PPPPPPPP-9005 - DIN rail bus connectors

DIN rail connector, color: black, nominal current: 6 A (parallel contacts), rated voltage (III/2): 32 V, number of positions: 8, product range: TBUS8-25.., pitch: 2.54 mm, mounting: DIN rail mounting, locking: without, mounting method: without, type of packaging: packed in cardboard, Item with

ICS25-F22U-9005 - Connection plate

DIN rail housing, ICS filler, with USB function cutout, width: 25 mm, height: 7.25 mm, depth: 22.4 mm, color: black (similar RAL 9005)

ICS25-F45D15-9005 - Connection plate

DIN rail housing, ICS filler, with D-SUB 15 function cutout, width: 25 mm, height: 7.25 mm, depth: 44.9 mm, color: black (similar RAL 9005)

ICS25-F45D9-9005 - Connection plate

DIN rail housing, ICS filler, with D-SUB 9 function cutout, width: 25 mm, height: 7.25 mm, depth: 44.9 mm, color: black (similar RAL 9005)

ICS25-F22J-9005 - Connection plate

DIN rail housing, ICS filler, with RJ45 function cutout, width: 25 mm, height: 7.25 mm, depth: 22. 4 mm, color: black (similar RAL 9005)

ICS25-F22A-9005 - Connection plate

DIN rail housing, ICS filler, with antenna function cutout, width: 25 mm, height: 7.25 mm, depth: 22.4 mm, color: black (similar RAL 9005)

ICS20-F22U-9005 - Connection plate

DIN rail housing, ICS filler, with USB function cutout, width: 20 mm, height: 7.25 mm, depth: 22.4 mm, color: black (similar RAL 9005)

Inductive Sensor – For Underwater Applications

Features ■Threaded barrel, M18 x 1 ■Plastic, POM ■For underwater and off-shore applications ■Oil and seawater resistant ■Protection class IP68, 500 m water column ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 2 G, Ex Zone 1 ■ATEX ca

ICS25-F45S-9005 - Connection plate

DIN rail housing, ICS filler, closed, width: 25 mm, height: 7.25 mm, depth: 44.9 mm, color: black (similar RAL 9005)

ICS25-F22S-9005 - Connection plate

DIN rail housing, ICS filler, closed, width: 25 mm, height: 7.25 mm, depth: 22.4 mm, color: black (similar RAL 9005)

ICS20-F45S-9005 - Connection plate

DIN rail housing, ICS filler, closed, width: 20 mm, height: 7.25 mm, depth: 44.9 mm, color: black (similar RAL 9005)

ICS20-F22S-9005 - Connection plate

DIN rail housing, ICS filler, closed, width: 20 mm, height: 7.25 mm, depth: 22.4 mm, color: black (similar RAL 9005)

ICS25-C122X12-9005 - Upper housing part

DIN rail housing, Upper part, closed, width: 25 mm, height: 122.5 mm, depth: 14.35 mm, color: black (similar RAL 9005)

ICS25-TL100X12-9005 - Upper housing part

DIN rail housing, Upper part, with transparent hinged cover, width: 25 mm, height: 101 mm, depth: 14.35 mm, color: black (similar RAL 9005)

SACC-M12MS-5PL DN - Data connector

Data connector, CANopen®, DeviceNet™, 5-position, unshielded, Plug straight M12, A, Pushlock spring connection, knurl material: Plastic, external cable diameter 4 mm ... 8 mm Your advantages • Time-saving Push-Lock connection: Tool-free connection and disconnection of conductors by opening th

SACC-M12MR-5PL DN - Data connector

Data connector, CANopen®, DeviceNet™, 5-position, unshielded, Plug angled M12, coding: A, Push-lock spring connection, knurl material: Plastic, external cable diameter 4 mm ... 8 mm Your advantages • Time-saving Push-Lock connection: Tool-free connection and disconnection of conductors by ope

SACC-M12FR-5PL DN - Data connector

Data connector, CANopen®, DeviceNet™, 5-position, unshielded, Socket angled M12, A, Pushlock spring connection, knurl material: Plastic, external cable diameter 4 mm ... 8 mm Your advantages • Time-saving Push-Lock connection: Tool-free connection and disconnection of conductors by opening th

ICS25-TL77X12-9005 - Upper housing part

DIN rail housing, Upper part, with transparent hinged cover, width: 25 mm, height: 78.5 mm, depth: 14.35 mm, color: black (similar RAL 9005)

ICS25-C77X12-9005 - Upper housing part

DIN rail housing, Upper part, closed, width: 25 mm, height: 77.5 mm, depth: 14.35 mm, color: black (similar RAL 9005)

raaco Assortment Boxes

Assorter Environmentally-friendly, made from recyclable materials Assorter is the only one of our 3 assortment boxes, which is available with fixed compartments. Assorter is a system designed and created specifically for practical sorting. Assorter was developed according to DFD guidelines

EV-T2G3C-3AC32A-10,0M6,0ESBK01 - AC charging cable

CHARX connect comfort, Type 2, AC charging cable, 32 A permanent, 480 V AC, with vehicle charging connector and open cable end, cable: 10 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, NOTE: Signal transmission is dependent on the cable length and may be ad

EV-T2G3C-3AC20A-10,0M2,5ESBK01 - AC charging cable

CHARX connect comfort, Type 2, AC charging cable, 20 A permanent, 480 V AC, with vehicle charging connector and open cable end, cable: 10 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, NOTE: Signal transmission is dependent on the cable length and may be ad

EV-T2G3C-1AC20A-10,0M2,5ESBK01 - AC charging cable

CHARX connect comfort, Type 2, AC charging cable, 20 A permanent, 250 V AC, with vehicle charging connector and open cable end, cable: 10 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, Ferrules, NOTE: Signal transmission is dependent on the cable length and

raaco Assortment Boxes

Assorter Environmentally-friendly, made from recyclable materials Assorter is the only one of our 3 assortment boxes, which is available with fixed compartments. Assorter is a system designed and created specifically for practical sorting. Assorter was developed according to DFD guidelines

Communication module - IOL MA8 PN DI8

Eight-channel IO-Link master provides convenient configuration of IO-Link devices using webbased management. Supports connectivity to PROFINET IO, MODBUS, and OPC UA. Features eight auxiliary digital inputs, redundant input power supply connections, plug-in push-in terminals. Product Descrip

Communication module - IOL MA8 EIP DI8

Eight-channel IO-Link master provides convenient configuration of IO-Link devices using webbased management. Supports connectivity to EtherNet/IP, MODBUS, and OPC UA. Features eight auxiliary digital inputs, redundant input power supply connections, plug-in push-in terminals. Product Descrip

Inst, 12 Pr #16 Str BC, PVC-NYL Ins E1, OS, Blk PVC Jkt, 600V TC-ER 150V NPLF 90C Dry 75C Wet

Product Description UL Instrumentation, 12 Pair 16AWG (7x24) Bare Copper, PVC-NYL Insulation E1 Color Code, Overall Beldfoil® Shield, Black PVC Outer Jacket, 600V TC-ER 150V NPLF 90C Dry 75C Wet SUN RES DIR BUR

Inst, 12 Pr #16 Str BC, PVC-NYL Ins E1, OS, Blk PVC Jkt, 600V TC-ER 150V NPLF 90C Dry 75C Wet

Product Description UL Instrumentation, 12 Pair 16AWG (7x24) Bare Copper, PVC-NYL Insulation E1 Color Code, Overall Beldfoil® Shield, Black PVC Outer Jacket, 600V TC-ER 150V NPLF 90C Dry 75C Wet SUN RES DIR BUR

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

Fixed Inductors for Surface Mounting

FEATURES • Low profile (2.8 × 3.0mm square, 1.0/1.2/1.5/1.8mm Max.height). • Magnetically shielded construction and low DC resistance. • Ideal for a variety of DC-DC converter inductor applications.(DVC,DSC,Cellular phone,PDA) • RoHS compliant

包装：线轴 描述：CABLE 12COND 16AWG SLATE 100' 电缆，电线 多芯导线

Heyco짰 Nylon PCB Supports - Threaded Male

文件：90.58 Kbytes Page：1 Pages

Nylon PCB Supports - Threaded Male

文件：117.5 Kbytes Page：1 Pages

he WDK two-tier modular terminals can feed two potentials in one terminal.

文件：659.71 Kbytes Page：13 Pages

CONTRAST SENSORS

文件：1.23086 Mbytes Page：8 Pages

OMNIMATE Signal - series BC/SC 3.81 SC-SMT 3.81/02/180G 3.2SN BK BX

文件：371.38 Kbytes Page：35 Pages

Suction cup insert

文件：99.29 Kbytes Page：1 Pages

LEVEL SENSORS

文件：221.16 Kbytes Page：4 Pages

The FET Constant-Current Source/Limiter

Integrated Circuit VCO for Phase Lock Loop(PLL)