Si-100 Motor Control

Features • Programmable for stand alone operation with Applied Motion’s easy to use Si Programmer™ Windows software (software and programming cable included) • Can be operated in real time from a host PC or PLC using Applied Motion’s Si Command Language ™ (SCL) • Can be networked with all

Heyco-Flex?줞ounting Brackets

文件：103.47 Kbytes Page：1 Pages

包装：散装 描述：LAMINATE FR-4 36\ 原型开发，制造品 有孔原型板

Heyco-Flex™Mounting Brackets

文件：102.49 Kbytes Page：1 Pages

包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：PC TEST POINT SLOTTED 测试与计量 测试点

FTP-3/3SL GN - Test plug

Test plug, number of positions: 3, color: green

FTP-3/4SL GN - Test plug

Test plug, nom. voltage: 400 V, number of positions: 4, Rated cross section: 2.5 mm2, color: green

FTP-3/4SL - Test plug

Test plug, nom. voltage: 400 V, nominal current: 20 A, number of positions: 4, connection method: Cable lug connection, Rated cross section: 2.5 mm2, color: gray

FTP-3/3SL - Test plug

Test plug, number of positions: 3, color: gray

FTP-3/2SL - Test plug

Test plug, number of positions: 2, color: gray

FBP-3/2SL - Cover profile

Cover profile, number of positions: 2, color: transparent Commercial data

FBP-3/3SL - Cover profile

Cover profile, number of positions: 3, color: transparent

FBP-3/4SL - Blind plug

Blind plug, number of positions: 4, color: transparent

Presence and motion detectors Wall installation indoor

Description - Passive infra-red motion detector for wall installation - Half-round detection area 200°, Ø 16 m, (100 m2) - 1 channel light (Triac, 230 V), 2 wire connection, ideal for retrofitting - Compatible with branded switches, replaces conventional light switches - Mixed light measureme

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - 1 channel light (relay 230 V) - Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height - Extension of th

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - 1 channel light (relay 230 V) and 1 channel presence (relay potentialfree for HVAC control) - Circular detection area 3

Presence and motion detectors Ceiling installation indoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - 1 channel light (relay 230 V) - Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height - Extension of th

Presence and motion detectors Ceiling installation indoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - 1 channel light (relay 230 V) - Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height - Extension of th

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, surface-mounting - 1 channel light (relay 230 V) - Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height - Extension of the detection area by parallel switching, a maximum of 8 detectors can be connected in parallel - Networking

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, surface-mounting - 1 channel light (relay 230 V) and 1 channel presence (relay potentialfree for HVAC control) - Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height - Extension of the detection area by parallel switching, a max

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - Rectangular detection area 360°, 28 x 5 m (140 m2) at 3 m mounting height - 1 channel light (relay 230 V) - Extension

Presence and motion detectors Ceiling installation indoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - Rectangular detection area 360°, 28 x 5 m (140 m2) at 3 m mounting height - 1 channel light (relay 230 V) - Extension

Presence and motion detectors Ceiling installation indoor

Description - Passive infrared presence detector, ceiling installation as supplied or flush-mounting by means of removable springs/protection cap and enclosed mounting frame - Rectangular detection area 360°, 28 x 5 m (140 m2) at 3 m mounting height - 1 channel light (relay 230 V) - Extension

Presence and motion detectors Ceiling installation outdoor

Description - Passive infrared presence detector, for surface-mounting - Rectangular detection area 360°, 28 x 5 m (140 m2) at 3 m mounting height - 1 channel light (relay 230 V) - Extension of the detection area by parallel switching, a maximum of 8 detectors can be connected in parallel - N

100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

High-performance 24-port 10Gb aggregation switch

The X590 Series products are purpose-built 24-port 1Gb/10Gb switches designed for high-performance enterprise and aggregation applications. The X590 can also support a range of uplink interface speeds, including 10Gb, 25Gb, 40Gb, 50Gb, and 100Gb, all in a compact 1RU form factor. This enables the

Scalable advanced 10Gb aggregation switch

The X670-G2 product family provides high density 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form factor. With its versatile design, the X670-G2 provides high density Layer 2/3 10Gb networking with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast

High-performance 48-port 10Gb aggregation and leaf switch

The X690 Series products are high-density, purpose-built 10Gb/100Gb switches designed for high-performance enterprise and aggregation applications. The X690 can support a range of interface speeds, including 1Gb, 10Gb, 25Gb, 40Gb, 50Gb, and 100Gb, all in a compact 1RU form factor. This enables the

AB-PTI 16-NLS BU - Support bracket

Support bracket, depth: 46.8 mm, width: 12.2 mm, height: 81.9 mm, color: blue

10301 Extreme Compatible Transceiver SFP 10GBase-SR (850nm, MMF, 300m, DOM)

Features ATGBICS 10301 10GBase-SR supports a distance of up to 300m over multi-mode fibre (MMF) using a wavelength of 850nm via an LC connector. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver. Our product m

100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

10301-T Extreme Compatible Transceiver SFP 100/1000/10000Base T (Copper RJ45, 30m)

Features ATGBICS 10301-T 10GBase-T supports a distance of up to 30m over a copper connection via a RJ-45 connector. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7. It supports 100/1000/10000 auto negotiation and auto MDI/MDIX.  Our

High-performance 24-port 10Gb aggregation switch

The X590 Series products are purpose-built 24-port 1Gb/10Gb switches designed for high-performance enterprise and aggregation applications. The X590 can also support a range of uplink interface speeds, including 10Gb, 25Gb, 40Gb, 50Gb, and 100Gb, all in a compact 1RU form factor. This enables the

Scalable advanced 10Gb aggregation switch

The X670-G2 product family provides high density 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form factor. With its versatile design, the X670-G2 provides high density Layer 2/3 10Gb networking with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast

High-performance 48-port 10Gb aggregation and leaf switch

The X690 Series products are high-density, purpose-built 10Gb/100Gb switches designed for high-performance enterprise and aggregation applications. The X690 can support a range of interface speeds, including 1Gb, 10Gb, 25Gb, 40Gb, 50Gb, and 100Gb, all in a compact 1RU form factor. This enables the

Fuse carriers, Domestic cartridge fuses

[carclo-optics] Avago 20 & 26.5mm Range Avago Aveon 20 & 26.5mmRange Avago Jade 20 & 26.5mmRange Avago Moonstone 20 & 26.5mmRange

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for recess ceiling installation indoors - Circular detection area 360°, up to Ø 8 m (50 m2) at mounting height 2.5 m - 1 channel light (Relay, 230 V) - Automatic motion and brightness-dependent control for lighting - Mixed light measurement - Operation as

MODULO RELEVADOR DE 5V/10A DE UNA VIA

DESCRIPCIÓN El módulo Grove-Relay es un interruptor digital normalmente abierto que puede manejar la corriente hasta 5A a 250 VCA durante largos períodos de tiempo. Cuando el relé está encendido, el LED se encenderá y el relé permitirá que fluya la corriente. La capacidad de voltaje pico es de 2

MODULO MOSFET PARA ARDUINO DE 5V - 15V

DESCRIPCIÓN: El módulo le permite acoplar y controlar proyectos de mayor voltaje, con un voltaje menor, desde cualquier microcontrolador, también funciona como un tipo de interruptor, con una frecuencia de conmutación que puede alcanzar hasta los 5 MHz, mucho más rápido que un relé mecánico norma

RELÉ DE ENCLAVAMIENTO DE 2 BOBINAS

DESCRIPCIÓN: Este módulo se basa en un relé de enclavamiento de 2 bobinas. A diferencia del relé ordinario, este relé de enclavamiento no necesita energía continua para mantener el estado, solo se necesita un pulso ascendente/descendente para cambiar el estado de trabajo.

MODULO RELEVADOR DE 5V 30A NORMALMENTE CERRADO

DESCRIPCIÓN: El relé SPDT de un solo polo y doble tiro es bastante útil en ciertas aplicaciones porque tiene un terminal común y 2 contactos que son excelentes para seleccionar entre dos opciones.

SHIELD GROVE PARA ARDUINO MEGA

DESCRIPCIÓN: Mega Shield es una placa de expansión para Arduino Mega cuenta con conectores de 4 pines de 2mm (señal 1, señal 2, VCC y GND), con headers de 2,54 mm de 3 pines. Los conectores con hebilla de 4 pines hacen el cableado sea más estable. Mega Shield incluye Digital 0 - 21 y Anologue 0

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for recess ceiling installation indoors - Circular detection area 360°, up to Ø 8 m (50 m2) at mounting height 2.5 m - 1 channel light (Relay, 230 V) and 1 channel presence (relay potentialfree for HVAC control) - Automatic motion and brightness-dependent co

MODULO DE RELEVADORES SPDT DE 2 CANALES

DESCRIPCIÓN: El modulo de relevedares SPDT de 2 canales de Grove tiene dos interruptores unipolares de dos tiros (SPDT). Solo requiere señales de bajo voltaje y baja corriente para controlar los interruptores. Específicamente, puede usar 5 V CC para controlar un máximo de 250 V CA o 110 V CC.

RELÉ SPDT DE 4 CANALES

DESCRIPCIÓN: El relé SPDT de 4 canales de Grove tiene cuatro interruptores unipolares de doble vía (SPDT). Solo requiere señales de bajo voltaje y baja corriente para controlar esos interruptores.

RELÉ DE ESTADO SÓLIDO DE 8 CANALES

DESCRIPCIÓN: Relé de estado sólido de 4 canales, SSR, conmutador. APLICACIONES  Operaciones que requieren conmutación de baja latencia, por ejemplo, control de luces de escenario.  Dispositivos que requieren alta estabilidad, por ejemplo, dispositivos médicos, señales de tráfico.  Situac

RELÉ DE ESTADO SÓLIDO V2

DESCRIPCIÓN: Relé de estado sólido V2, SSR, interruptor. APLICACIONES  Operaciones que requieren conmutación de baja latencia, por ejemplo, control de luces de escenario.  Dispositivos que requieren alta estabilidad, por ejemplo, dispositivos médicos, señales de tráfico.  Situaciones que

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for recess ceiling installation indoors - Circular detection area 360°, up to Ø 6 m (28 m2) at mounting height 2.5 m - 1 channel light (Relay, 230 V) - Automatic motion and brightness-dependent control for lighting - Mixed light measurement - Operation as

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for surface-mounted ceiling installation indoors - Circular detection area 360°, up to Ø 8 m (50 m2) at mounting height 2.5 m - 1 channel light (Relay, 230 V) - Automatic motion and brightness-dependent control for lighting - Mixed light measurement - Oper

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for recess ceiling installation indoors - Rectangular detection area 360°, 25 x 3 m (75 m²) at 2,5 m mounting height - 1 channel light (Relay, 230 V) - Automatic motion and brightness-dependent control for lighting - Mixed light measurement - Operation as

Presence and motion detectors Ceiling installation indoor

Description - Motion detector (PIR) for surface-mounted ceiling installation indoors - Rectangular detection area 360°, 25 x 3 m (75 m²) at 2,5 m mounting height - 1 channel light (Relay, 230 V) - Automatic motion and brightness-dependent control for lighting - Mixed light measurement - Oper

Presence and motion detectors Wall installation outdoor

Description - Passive infra-red motion detector for wall installation - 180° detection angle, 10 m at 2 m mounting height - For outdoor use - Adjustable brightness switching value and switch-off delay - Mixed light measurement - Instant start-up possible via factory preset

10302 Extreme Compatible Transceiver SFP 10GBase-LR (1310nm, SMF, 10km, DOM)

Features ATGBICS 10302 10GBase-LR supports a distance of up to 10km over single-mode fibre (SMF) using a wavelength of 1310nm via an LC connector. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver. Our product

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

TTL HD74/HD74S Series

JIGH RELIABILITY CURRENT REGULATOR DIODES

8-INPUT POSITIVE-NAND GATES

8-INPUT POSITIVE-NAND GATES