丝印代码：1007；Low Noise, High Speed Precision Operational Amplifiers

文件：518.669 Kbytes Page：16 Pages

丝印代码：1007；Low Noise, High Speed Precision Operational Amplifiers

文件：365.57 Kbytes Page：16 Pages

WILMAR??Protective Relays - 1000 Series

Phase failure relays protect motors, equipment and personnel from damage or injury caused by open phase, reversed phase sequence, or low voltage in a three phase system. Models are available for 50 and 60 Hz with voltages up to 575 volts. Motor control switchboards are a common application. Opera

QUICK-FIT TERMINALS

[KEYSTONE] AVAILABLE IN BRASS OR STEEL TABS • Ideal for rugged multi-insertion applications • Pre-assembled header reduces PC assembly costs • Increases PC board retention strength • Keeps terminals perpendicular • Maintains position for wave soldering

包装：散装 描述：CONN QC TAB 0.250 4 PAIR 连接器，互连器件 快速连接，快速断开连接器

丝印代码：1007I；Low Noise, High Speed Precision Operational Amplifiers

文件：365.57 Kbytes Page：16 Pages

丝印代码：1007I；Low Noise, High Speed Precision Operational Amplifiers

文件：518.669 Kbytes Page：16 Pages

SBS 6:FORTL.ZAHLEN - Marking card for terminal marking

Marking card for terminal marking, Card, white, labeled, printed horizontally: Front 1-10, back 11- 20 or front 21-30, back 31-40, etc., mounting type: latching, snap into flat marker groove, for terminal block width: 6 mm, Number of individual labels: 250, text field height: 6 mm, text field w

SBS10:FORTL.ZAHLEN - Marking card for terminal marking

Marking card for terminal marking, Card, white, labeled, horizontal: Front 1-10, back 11-20 or front 21-30, back 31-40, etc., mounting type: latching, snap into flat marker groove, for terminal block width: 10 mm, text field height: 6 mm, text field width: 10.1 mm

Scalable advanced 10Gb aggregation switch

The X670-G2 product family provides high density 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form factor. With its versatile design, the X670-G2 provides high density Layer 2/3 10Gb networking with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast

10070H Extreme Compatible Transceiver SFP 10/100/1000Base-T (RJ45, Copper, 100m)

Features ATGBICS 10070H SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100m. Extreme 1000BASE-T SFP modules support 10/100/1000 auto negotiation and auto MDI/MDIX. Our product meets the specification of Extreme 10070H= and we proudly offer a com

FKDSO 2,5/ 2-R GY - PCB terminal block

Printed circuit board terminal, nominal current: 22 A, rated voltage (III/2): 250 V, nominal cross section: 2.5 mm2, number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: FKDSO 2,5/..-R, pitch: 5 mm, connection method: Push-in spring connection, mounting: Wa

FKDSO 2,5/ 3-L GY - PCB terminal block

Printed circuit board terminal, nominal current: 22 A, rated voltage (III/2): 250 V, nominal cross section: 2.5 mm2, number of potentials: 3, number of rows: 1, number of positions per row: 3, product range: FKDSO 2,5/..-L, pitch: 5 mm, connection method: Push-in spring connection, mounting: Wa

FKDSO 2,5/ 4-L GY - PCB terminal block

Printed circuit board terminal, nominal current: 22 A, rated voltage (III/2): 250 V, nominal cross section: 2.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: FKDSO 2,5/..-L, pitch: 5 mm, connection method: Push-in spring connection, mounting: Wa

10071 Extreme Compatible Transceiver SFP 1000Base-SX (850nm, MMF, 550m)

Features ATGBICS 10071 1000Base-SX supports a distance of up to 550m over multi-mode fibre (MMF) using a wavelength of 850nm via an LC connector. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver. It is a hot-

10071H Extreme Compatible Transceiver SFP 1000Base-SX (850nm, MMF, 550m)

Features ATGBICS 10071H 1000Base-SX supports a distance of up to 550m over multi-mode fibre (MMF) using a wavelength of 850nm via an LC connector. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver. It is a hot

NI10-K20-Y1

■ Smooth barrel, Ø 20 mm ■ Plastic, PBT-GF30-V0 ■ DC 2-wire, nom. 8.2 VDC ■ Output acc. to DIN EN 60947-5-6 (NAMUR) ■ Cable connection ■ ATEX category II 2 G, Ex Zone 1 ■ ATEX category II 1 D, Ex Zone 20 ■ SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 ■ SIL 3

Minitek® Crimp-to-Wire

FEATURES ■ Dual-beam contact design for highly reliable electrical performance BENEFITS ■ Latching key assures proper alignment and friction retention

SF-06KS010 - Crimp contact

Crimp contact, Socket, turned, contact diameter: 0.6 mm, crimp range: 0.08 mm2 ... 0.25 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb

EPIC® H-B 16 AG-LB

Description  The housing standard.  Wide choice for all applications.

10072 Extreme Compatible Transceiver SFP 1000Base-LX (1310nm, SMF, 10km)

Features ATGBICS 10072 1000Base-LX supports a distance of up to 10km over single mode fibre (SMF) using a wavelength of 1310nm via an LC connector.  Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver.  Our produc

Platinum sensor with wires on thin substrate For high temperatures

Benefits & Characteristics ▪ Excellent long-term stability ▪ Low self-heating ▪ Fast response time ▪ Vibration and temperature shock resistant ▪ Optimal for low power applications

EPIC® H-B 16 AD-LB

Description  The housing standard.  Wide choice for all applications.

EPIC® H-B 16 SGR

Description  The housing standard.  Wide choice for all applications.

Inductive Sensor – Slot-type

Features ■Slot sensor, height 9 mm ■Plastic, PBT‐GF30‐V0 ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 for temperatures up to +70 °C ■SIL 2 acc. to IEC 61508 Functional principle Ind

EPIC® H-B 16 SDR-BO

Description  The housing standard.  Wide choice for all applications.

Inductive Sensor – Slot-type

Features ■Slot sensor, height 30 mm ■Plastic, PBT‐GF30‐V0 ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 ■S

Minitek® Crimp-to-Wire

FEATURES ■ Dual-beam contact design for highly reliable electrical performance BENEFITS ■ Latching key assures proper alignment and friction retention

Minitek® Crimp-to-Wire

FEATURES ■ Dual-beam contact design for highly reliable electrical performance BENEFITS ■ Latching key assures proper alignment and friction retention

Minitek® Crimp-to-Wire

FEATURES ■ Dual-beam contact design for highly reliable electrical performance BENEFITS ■ Latching key assures proper alignment and friction retention

Pulse Transformers

RoHS compliant UL 94V-0 package material Isolation to 4kVrms Compact footprint PCB mounting Backward compatible with Sn/Pb soldering systems

1007P and 1001T XOR Refrigeration Pressure Gauges

FEATURES „ PowerFlex™ movement provides superior resistance to shock, vibration and pulsation „ FlutterGuard™ (STD.) reduce movement wear and pointer flutter „ Easy access window for minor span adjustments „ 1007P ABS case offers durability and corrosion resistance „ 1001T gauges are tested t

WILMAR??Protective Relays - 1000 Series

Phase failure relays protect motors, equipment and personnel from damage or injury caused by open phase, reversed phase sequence, or low voltage in a three phase system. Models are available for 50 and 60 Hz with voltages up to 575 volts. Motor control switchboards are a common application. Opera

端子配件

Nylon PCB Supports - Imperial Spacing

文件：126.42 Kbytes Page：1 Pages

螺钉式接线端子

螺钉式接线端子

M 1,27 SRC A, 2-polig BA1

文件：62.85 Kbytes Page：1 Pages

Messerl. SMC-Q-50-SMD-BA7-03

文件：109.62 Kbytes Page：1 Pages

Federkontakte 2,54 SRC-A BA1

文件：66.76 Kbytes Page：1 Pages

ERMET FS FEDERLEISTE C

文件：121.16 Kbytes Page：1 Pages

MTR SKT INSTR RATED 20A 13T

文件：135.98 Kbytes Page：2 Pages

Federleiste 6mm SMD, 50 polig

文件：138.71 Kbytes Page：1 Pages

TMC-P-09-EE-Standard-BA8

文件：78.68 Kbytes Page：1 Pages

Male Con. E48 Solder

文件：68.66 Kbytes Page：1 Pages

ERMET FEDERL C THT

文件：110.26 Kbytes Page：1 Pages

Federkontakte 2,54 SRC-A BA1

文件：67.08 Kbytes Page：1 Pages

Messerl. SMC-Q 68-SMD-BA7-13

文件：127.31 Kbytes Page：1 Pages

F 2,54 SRC-A, 2-polig

文件：35.12 Kbytes Page：1 Pages

0,8 DRC-B, F 8mm, 16 polig

文件：110.07 Kbytes Page：1 Pages

Marker for terminal blocks - SBS 5:FORTL.ZAHLEN 1-20

文件：44.58 Kbytes Page：2 Pages

Marker for terminal blocks - SBS 5:FORTL.ZAHLEN 21-40

文件：44.57 Kbytes Page：2 Pages

Marker for terminal blocks - SBS 5:FORTL.ZAHLEN 41-60

文件：44.59 Kbytes Page：2 Pages

Marker for terminal blocks - SBS 5:FORTL.ZAHLEN 61-80

文件：44.59 Kbytes Page：2 Pages

Marker for terminal blocks - SBS 5:FORTL.ZAHLEN 81-100

文件：44.59 Kbytes Page：2 Pages

DUAL PCB CONNECTOR-48V MicroTCA-MALE PIP- version

文件：140.79 Kbytes Page：1 Pages

F 2,54 SRC-A, 2-polig

文件：35.14 Kbytes Page：1 Pages

F 2,54 SRC-A, 3-polig

文件：36.38 Kbytes Page：1 Pages

LPV FEDERLEISTE M ZUGENTLAST

文件：105.5 Kbytes Page：1 Pages

Federleiste M12 D Cod.

文件：89.73 Kbytes Page：1 Pages

Digital Alarm Clock

MOS IC

Integrated Circuit PMOS Digital Alarm Clock

LED DUPLEX DIGITAL RADIO CLOCK