Nylon PCB Supports - Imperial Spacing

文件：111.86 Kbytes Page：1 Pages

Low Skew 2:8 Differential Clock Driver

General Description The 100310 is a low skew 8-bit differential clock driver which is designed to select between two separate differential clock inputs. The low output to output skew ( Features ■ Low output to output skew ■ Differential inputs and outputs ■ Allows multiplexing between two clo

Low Skew 2:8 Differential Clock Driver

General Description The 100310 is a low skew 8-bit differential clock driver which is designed to select between two separate differential clock inputs. The low output to output skew ( Features ■ Low output to output skew ■ Differential inputs and outputs ■ Allows multiplexing between two clo

Low Skew 2:8 Differential Clock Driver

General Description The 100310 is a low skew 8-bit differential clock driver which is designed to select between two separate differential clock inputs. The low output to output skew ( Features ■ Low output to output skew ■ Differential inputs and outputs ■ Allows multiplexing between two clo

Low Skew 1:9 Differential Clock Driver

General Description The 100311 contains nine low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input (CLKIN, CLKIN). If a single-ended input is desired, the VBB output pin may be used to drive the remaining input line.

SAS PLUG VERTICAL SMT ASSY

SAS PLUG VERTICAL SMT ASSY

SAS PLUG VERTICAL SMT ASSY

SAS PLUG VERTICAL SMT ASSY

SAS PLUG VERTICAL SMT ASSY

SAS PLUG VERTICAL SMT ASSY

Low Skew 1:9 Differential Clock Driver

General Description The 100311 contains nine low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input (CLKIN, CLKIN). If a single-ended input is desired, the VBB output pin may be used to drive the remaining input line.

Low Skew 1:9 Differential Clock Driver

General Description The 100311 contains nine low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input (CLKIN, CLKIN). If a single-ended input is desired, the VBB output pin may be used to drive the remaining input line.

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quad Driver

General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all o

Low Power Quint Differential Line Receiver

General Description The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply (VBB) is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher (

Low Power Quint Differential Line Receiver

General Description The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply (VBB) is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher (

Low Power Quint Differential Line Receiver

General Description The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply (VBB) is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher (

Low Power Quint Differential Line Receiver

General Description The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply (VBB) is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher (

Low Power Quint Differential Line Receiver

General Description The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply (VBB) is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher (

Low Skew Quad Clock Driver

General Description The 100315 contains four low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input. This device also has the capability to select a secondary single-ended clock source for use in lower frequency system

Low Skew Quad Clock Driver

General Description The 100315 contains four low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input. This device also has the capability to select a secondary single-ended clock source for use in lower frequency system

Low Power Quad Differential Line Driver with Cut-Off

General Description The 100316 is a quad differential line driver with output cutoff capability. The outputs are designed to drive a doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. The 100316 is ideal for driving low noise, differential ECL backplanes. A LO

Low Power Quad Differential Line Driver with Cut-Off

General Description The 100316 is a quad differential line driver with output cutoff capability. The outputs are designed to drive a doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. The 100316 is ideal for driving low noise, differential ECL backplanes. A LO

Low Power Quad Differential Line Driver with Cut-Off

General Description The 100316 is a quad differential line driver with output cutoff capability. The outputs are designed to drive a doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. The 100316 is ideal for driving low noise, differential ECL backplanes. A LO

Low Power Hex Line Driver with Cut-Off

General Description The 100319 is a Hex Line Driver with output cut-off capability. The 100319 has single ended ECL inputs and differential ECL outputs, designed to drive a differential, doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. A LOW on the Output En

Low Power Hex Line Driver with Cut-Off

General Description The 100319 is a Hex Line Driver with output cut-off capability. The 100319 has single ended ECL inputs and differential ECL outputs, designed to drive a differential, doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. A LOW on the Output En

Low Power Hex Line Driver with Cut-Off

General Description The 100319 is a Hex Line Driver with output cut-off capability. The 100319 has single ended ECL inputs and differential ECL outputs, designed to drive a differential, doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. A LOW on the Output En

包装：散装 描述：PCB TERMINAL 连接器，互连器件 线对板

包装：袋 描述：STAT SHLD BAG 1000 SERIES 1=1EA 静电控制，防静电，ESD，无尘室产品 静电控制屏蔽包，防静电袋、物料

Low Skew 2:8 Differential Clock Driver

连接器外壳

SAS RECEPPTACLE VERTICAL PF TYPE ASSY

文件：258.05 Kbytes Page：2 Pages

SAS RECEPPTACLE VERTICAL PF TYPE ASSY

文件：258.05 Kbytes Page：2 Pages

SAS RECEPPTACLE VERTICAL PF TYPE ASSY

文件：258.05 Kbytes Page：2 Pages

SAS RECEPPTACLE VERTICAL PF TYPE ASSY

文件：258.05 Kbytes Page：2 Pages

气体仪器

We are Dedicated to Achieving Customer Satisfaction Through Continuous Improvement

文件：2.45415 Mbytes Page：164 Pages

Low Power Quad Driver

文件：119.3 Kbytes Page：6 Pages

Low Power Quad Driver

文件：119.3 Kbytes Page：6 Pages

Low Power Quad Driver

文件：119.3 Kbytes Page：6 Pages

Low Power Quint Differential Line Receiver

文件：112.62 Kbytes Page：8 Pages

Low Power Quint Differential Line Receiver

文件：144.13 Kbytes Page：7 Pages

bUTTWELD fittings

文件：2.11241 Mbytes Page：8 Pages

bUTTWELD fittings

文件：2.11241 Mbytes Page：8 Pages

bUTTWELD fittings

文件：2.11241 Mbytes Page：8 Pages

bUTTWELD fittings

文件：2.11241 Mbytes Page：8 Pages

bUTTWELD fittings

文件：2.11241 Mbytes Page：8 Pages

Low Power Quint Differential Line Receiver

文件：112.62 Kbytes Page：8 Pages

Low Power Quint Differential Line Receiver

文件：112.62 Kbytes Page：8 Pages

Low-Skew Quad Clock Driver

文件：82.82 Kbytes Page：6 Pages

Low-Skew Quad Clock Driver

文件：153.91 Kbytes Page：7 Pages

CF Component Ultra high vacuum fittings

文件：374.63 Kbytes Page：20 Pages

CF Component Ultra high vacuum fittings

文件：374.63 Kbytes Page：20 Pages

CF Component Ultra high vacuum fittings

文件：374.63 Kbytes Page：20 Pages

CF Component Ultra high vacuum fittings

文件：374.63 Kbytes Page：20 Pages