excom I/O System Input Module, Digital, 4-channel

The input module DI401-EX is used for the connection of NAMUR sensors (DIN EN 60947-5-6) or mechanical contacts. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The modul

excom I/O System Frequency Meter, 2-channel

The input module DF20EX is equipped with 8 channels according to NAMUR which are split into two blocks. There is one frequency input per block and three control inputs/outputs. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. When connecti

excom I/O System I/O Module, Digital, 8-channel

The I/O module DM80Ex is used for the connection of NAMUR sensors (DIN EN 60 60947-5-6) and actuators. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The module features pr

excom I/O System Input Module, Analog, Active, HART, 4-channel

The input module AIH40Ex is used for the connection of 2-wire transducers (active input = source mode / transducer passive). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The ignition protection type of the inputs is Ex ia IIC. The in