High-Temp Universal ZIF DIP Burn-in & Test Socket

文件：716.86 Kbytes Page：1 Pages

Nylon PCB Supports - Imperial Spacing

文件：111.86 Kbytes Page：1 Pages

包装：散装 描述：16 Pin Ribbon Cable Breakout Boa 连接器，互连器件 接口模块

包装：盒 描述：CONN SPLICE 4 AWG CRIMP 连接器，互连器件 电线接头连接器

TXF700 HMI Series Accessories PoE Injector (M22 Connector for IP67 Connection) Max. 36-W PoE Output Power

Power and data supply for Power over Ethernet ■ Robust design ■ Mounting via M22 screw thread on the rear ■ Ethernet with 10/100 Mbps ■ Reverse-polarity protected and short-circuit proof ■ Surge protection and overcurrent protection

TXF700 HMI Series Accessories PoE Injector (M22 Connector for IP67 Connection) Max. 36-W PoE Output Power

Power and data supply for Power over Ethernet ■ Robust design ■ Mounting via M22 screw thread on the rear ■ Ethernet with 10/100 Mbps ■ Reverse-polarity protected and short-circuit proof ■ Surge protection and overcurrent protection

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Clamping flange, Ø 36 mm ■Solid shaft, Ø 8 mm × 15 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Clamping flange, Ø 36 mm ■Solid shaft, Ø 10 mm × 20 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Clamping flange, Ø 36 mm ■Solid shaft, Ø 6.35mm × 12.5mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Synchro flange, Ø 36 mm ■Solid shaft, Ø 6 mm × 12.5 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Synchro flange, Ø 36 mm ■Solid shaft, Ø 8 mm × 15 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Synchro flange, Ø 36 mm ■Solid shaft, Ø 10 mm × 20 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Synchro flange, Ø 36 mm ■Solid shaft, Ø 6.35 mm × 12.5 mm ■Magnetic measuring principle ■Shaft material: stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with slotted flex mount, Ø 46 mm ■Hollow shaft, Ø 6mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 position

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with slotted flex mount, Ø 46 mm ■Hollow shaft, Ø 8mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 position

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with slotted flex mount, Ø 46 mm ■Hollow shaft, Ø 10mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positio

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with slotted flex mount, Ø 46 mm ■Hollow shaft, Ø 1/4 ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 position

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with long torque stop ■Hollow shaft, Ø 6mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with long torque stop ■Hollow shaft, Ø 8mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with long torque stop ■Hollow shaft, Ø 10mm ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

Absolute Rotary Encoder - Single-Turn – IO-Link Industrial Line

Features ■Flange with long torque stop ■Hollow shaft, Ø 1/4 ■Optical measuring principle ■Shaft material, stainless steel ■IP67 rated on the shaft side ■‐40…+85 °C ■Max. 4000 rev/min ■10-30 VDC ■SSI (Binary Code) ■M12 connection, 8-pin ■360° resolved in 14 bit (16384 positions)

HF Read/Write Head – For Explosion Hazardous Areas

Features ■Smooth barrel ■Ex e terminal chamber with tension springs ■Stainless steel housing V2A ■Front cap made of liquid crystal polymer ■Laser engraved label, permanently legible ■Powered and operated only via connection to BL ident interface module ■M12 × 1 connector, connection only v

Pressure Transmitter With Voltage Output (3-Wire)

■ Ceramic measuring cell ■ Extremely high measuring accuracy ■ Compact and robust design ■ Excellent temperature behavior ■ Pressure range 0…2 psi rel. ■ 12…33 VDC ■ Analog output 0…10 V ■ Process connection 1/4-18 NPT male thread ■ Plug-in device, M12 × 1 Functional principle The pre

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range 0…0.25 bar rel. ■8…33 VDC ■Analog output 1…6 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐1000 product s

excom I/O System Input Module, Analog, Active, HART, 4-channel

The input module AIH40-N is used for the connection of 2-wire transducers (active input = source mode / transducer passive). The inputs are not galvanically isolated from each other. When connecting the field devices, care has to be taken that all outputs are on the same potential. HART-comp

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…9 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressur

excom I/O System Input Module, Digital, 4-channel

The input module DI401-EX is used for the connection of NAMUR sensors (DIN EN 60947-5-6) or mechanical contacts. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The modul

excom I/O System Frequency Meter, 2-channel

The input module DF20EX is equipped with 8 channels according to NAMUR which are split into two blocks. There is one frequency input per block and three control inputs/outputs. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. When connecti

excom I/O System I/O Module, Digital, 8-channel

The I/O module DM80Ex is used for the connection of NAMUR sensors (DIN EN 60 60947-5-6) and actuators. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The module features pr

excom I/O System Input Module, Analog, Active, HART, 4-channel

The input module AIH40Ex is used for the connection of 2-wire transducers (active input = source mode / transducer passive). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The ignition protection type of the inputs is Ex ia IIC. The in

Dynamic Inclinometer

Features ■Rectangular, plastic, Ultem ■Status displayed via LED ■Angle detection via one axis with 360 ° measuring range ■Temperature detection from -40 °C to 85 °C ■High protection class IP68/IP69K ■Protected against salt spray and rapid temperature change ■18…30 VDC ■M12 × 1 connector,

Dynamic Inclinometer

Features ■Rectangular, plastic, Ultem ■Status displayed via LED ■Angle detection via two axes with ±85 ° measuring range ■Temperature detection from -40 °C to 85 °C ■High protection class IP68/IP69K ■Protected against salt spray and rapid temperature change ■18…30 VDC ■M12 × 1 connector,

Pressure Transmitter With Voltage Output (3-Wire)

■ Ceramic measuring cell ■ Extremely high measuring accuracy ■ Compact and robust design ■ Excellent temperature behavior ■ Pressure range 0…5 psi rel. ■ 7…33 VDC ■ Analog output 0…5 V ■ Process connection 1/4-18 NPT male thread ■ Plug-in device, M12 × 1 Functional principle The press

Absolute Rotary Encoder - Multiturn – IO-Link Efficiency Line

Features ■Ø 58 mm servo flange ■Solid shaft, Ø 6mm x 12.5mm ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP64 on housing and shaft side ■‐20…+70 °C ■Max. 4000 rpm (continuous operation 2000 rpm) ■Energy harvesting technology ■18….30 VDC ■M12 x 1 male

Absolute Rotary Encoder - Multiturn – IO-Link Efficiency Line

Features ■Ø 58 mm servo flange ■Solid shaft, Ø 10mm x 20mm ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP64 on housing and shaft side ■‐20…+70 °C ■Max. 4000 rpm (continuous operation 2000 rpm) ■Energy harvesting technology ■18….30 VDC ■M12 x 1 male c

Absolute Rotary Encoder - Multiturn – IO-Link Efficiency Line

Features ■Ø 58 mm clamping flange ■Solid shaft, Ø 6mm x 12.5mm ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP64 on housing and shaft side ■‐20…+70 °C ■Max. 4000 rpm (continuous operation 2000 rpm) ■Energy harvesting technology ■18….30 VDC ■M12 x 1 ma

Absolute Rotary Encoder - Multiturn – IO-Link Efficiency Line

Features ■Ø 58 mm clamping flange ■Solid shaft, Ø 10mm x 20mm ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP64 on housing and shaft side ■‐20…+70 °C ■Max. 4000 rpm (continuous operation 2000 rpm) ■Energy harvesting technology ■18….30 VDC ■M12 x 1 mal

Pressure Transmitter With Voltage Output (3-Wire)

■ Ceramic measuring cell ■ Extremely high measuring accuracy ■ Compact and robust design ■ Excellent temperature behavior ■ Pressure range 0…3 psi rel. ■ 12…33 VDC ■ Analog output 0…10 V ■ Process connection 1/4-18 NPT male thread ■ Plug-in device, M12 × 1 Functional principle The pre

Pressure Transmitter With Voltage Output (3-Wire)

■ Ceramic measuring cell ■ Extremely high measuring accuracy ■ Compact and robust design ■ Excellent temperature behavior ■ Pressure range 0…3.5 psi rel. ■ 7…33 VDC ■ Analog output 0…5 V ■ Process connection 1/4-18 NPT male thread ■ Plug-in device, M12 × 1 Functional principle The pre

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range 0…16 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressur

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range 0…16 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range 0…16 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts

Inductive Sensor

Features ■Smooth barrel, Ø 6.5 mm ■Stainless steel, 1.4427 SO ■DC 3-wire, 10…30 VDC ■NO contact, NPN output ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts

Inductive Sensor

Features ■Smooth barrel, Ø 6.5 mm ■Stainless steel, 1.4427 SO ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…1 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…9 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■

Capacitive Sensor

Features ■M8 × 1 threaded barrel ■Stainless steel housing, probe made of PBT ■Fine adjustment via potentiometer ■DC 3-wire, 18…30 VDC ■Adjustable NC/NO contact ■Factory-set NO contact ■3-pin connector device, M8 × 1 Functional principle Capacitive proximity switches are designed for non-

Capacitive Sensor

Features ■M8 × 1 threaded barrel ■Stainless steel housing, probe made of PBT ■Fine adjustment via potentiometer ■DC 3-wire, 18…30 VDC ■Adjustable NC/NO contact ■Factory-set NO contact ■3-pin connector device, M8 × 1 Functional principle Capacitive proximity switches are designed for non-

Capacitive Sensor

Features ■M8 × 1 threaded barrel ■Stainless steel housing, probe made of PBT ■Fine adjustment via potentiometer ■DC 3-wire, 18…30 VDC ■Adjustable NC/NO contact ■Factory-set NO contact ■3-pin cable connection, open strands Functional principle Capacitive proximity switches are designed fo

Capacitive Sensor

Features ■M8 × 1 threaded barrel ■Stainless steel housing, probe made of PBT ■Fine adjustment via potentiometer ■DC 3-wire, 18…30 VDC ■Adjustable NC/NO contact ■Factory-set NO contact ■3-pin cable connection, open strands Functional principle Capacitive proximity switches are designed fo

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…1 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressur

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…1 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in

Pressure Transmitter – With 2 Switching Outputs and IO-Link

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…1 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■

Pressure Transmitter – With Current Output (2-Wire)

Features ■Ceramic measuring cell ■Extremely high measuring accuracy ■Compact and robust design ■Excellent temperature behavior ■Pressure range 0…160 mbar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM p

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Straight, 4-pin, IP67, IP68 ■Instrumentation Tray Cable ■Gray PVC jacket, 4X22 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Straight, 4-pin, IP67, IP68 ■Instrumentation Tray Cable ■Gray PVC jacket, 4X22 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Straight, 4-pin, IP67, IP68 ■Instrumentation Tray Cable ■Gray PVC jacket, 4X22 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT