Discrete POWER & Signal Technologies

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1μA above 1

TRANSIENT ABSORPTION ZENER

DESCRIPTION The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400CA offers similar voltages with an extended voltage range and also provides bidirectional options with a C o

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 600 Volts 1500 Watts Peak Power FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering g

Axial Lead Transient Voltage Suppressors (TVS)

Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clamping capability ♦ 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01 ♦ Fast response time: typically less than 1.0ps from 0 Volts to VBR min

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits used in telecom, computer, datacom and industrial electronic

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

1500W TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Features 1500w peak pulse power capability Excellent clamping capability Low incremental surge resistance Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. High temperature soldering guaranteed: 265 C/10S/9.5mm lead length at 5

TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in unidirectional and bidirectional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance

TRANSIENT VOLTAGE SUPPRESSOR

 Glass Passivated Die Construction  1500W Peak Pulse Power Dissipation  Uni-Directional Versions Available  Excellent Clamping Capability  Fast Response Time  Plastic Case Material has UL Flammability Classification Rating 94V-O  This is a Pb − Free Device  All SMC Parts are Tracea

TRANSIENT VOLTAGE SUPPRESSOR

Features · Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop circuit protection · Glass passivated junction · 1500W peak pulse power capability on 10/1000μs waveform, repetition rate(duty cycle) : 0.05% · Excellent clamping capability · Low incremen

Transient Voltage Suppressor Diodes

Features ● Excellent clamping capability ● Low dynamic impedance ● Solder dip 275 °C max. 7 s, per JESD 22-B106

TRANSIENT VOLTAGE SUPPRESSOR

Features Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

6.8 To 600V 1500W Axial Lead Transient Voltage Suppressors (TVS)

Features  Glass passivated chip junction in DO-201 Package  Low leakage  Uni and Bidirectional unit  Excellent clamping capability  1500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01%  Fast response time: typically less than 1.0ps from 0 Volts

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watts

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low zener impedance ■ Excellent clamping capability ■ 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 12V. ■ High Temperature soldering guaranteed:

1500W Transient Voltage Suppressor

Breakdown Voltage: 6.8 - 440 Volts Power: 1500 Watt Features - Plastic package has underwriters laboratory flammability classification 94V-0 - 1500W surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time:typically less than 1.0 ps from 0 Volts to

1500 Watt MosorbE Zener Transient Voltage Transient Voltage

1500 Watt Mosorb™ Zener Transient Voltage Suppressors Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high−energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These d

Unidirectional and bidirectional Transient Voltage Suppressor Diodes

• Peak pulse power dissipation 1500 W • Standard breakdown voltage range 6.8...440 V • Plastic case Ø 5.4 x 7.5 [mm] • Weight approx. 1.0 g • Plastic material has UL classification 94V-0 • Standard

TRANSZORB Transient Voltage Suppressors

Features • Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection • Glass passivated junction • 1500W peak pulse power capabililty on 10/1000µs waveform, repetition rate (duty cycle): 0.05 • Excellent clamping capability • Low incremental surge

TRANSZORB Transient Voltage Suppressors

1500W TRANSIENT VOLTAGE SUPPRESSOR Features ● 1500W Peak Pulse Power Dissipation ● Voltage Range 6.8V - 400V ● Constructed with Glass Passivated Die ● Uni- and Bidirectional Versions Available ● Excellent Clamping Capability ● Fast Response Time

Transient Voltage Suppressor Diodes

Voltage Range 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State Features ◇ UL Recognized File # E-96005 ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Exceeds environmental standards of MIL-STD-19500 ◇ 1500W surge capability at 10 x 100 us wavef

Silicon Avalanche Diodes - 1500 Watt Axial Leaded Transient Voltage Suppressors

Description The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

1500W Surface Mount Transient Voltage Suppressor

VOLTAGE 6.8 to 550 Volts Peak Pulse Power 1500 Watt Features: * Plastic package * Glass passivated chip junction in DO-201 package * 1500W surge capability at 10/1000 µs wave form * Excellent clamping capability * Low zener impedance * Fast response time: typically lessl t

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts

TRANSIL UNIAND BIDIRECTIONALTYPES

DESCRIPTION Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC’s. FEATURES ■ PEAK PULSE POWER : 1500

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:6.8-440V PEAK PULSE POWER: 1500W FEATURES • 1500W peak pulse power capability • Excellent clamping capability • Low incremental surge resistance • Fast response time: typically less than 1.0ps from 0V to VBR for unidirectional and 5.0nS for bidirectional types. • H

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 440 Volts 1500 watt Peak Power / 6.5 Watt Steady State

VOLTAGE - 6.8 to 440 Volts 1500 Watts Peak Power 6.5 Watt Steady State FEATURES • Plastic package • Glass passivated chip junction in DO-201 package • 1500W surge capability at 10/1000 µs wave from • Excellent clamping capability • Low zener impedance • Fast response time

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sol

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 6.8 --- 550 V PEAK PULSE POWER: 1500 W FEATURES ◇ Plastic package has underwriters laboratory flammability classification 94V-0 ◇ Glass passivated junction ◇ 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent clampin

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 1500 Watts FEATURES ● Glass passivate chip ● Low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS Breakdown Voltage 6.8 to 440 Volts Peak Pulse Power 1500 Watts FEATURES · Plastic package has Underwriters Laboratory Flammability Classification 94V-O · Glass passivated junction or silastic guard junction (open junction) · 1500W p

VOLTAGE 6.8V ~ 440V 1500W Peak Power / 5.0W Steady State 1500W Peak Power TVS

FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A abov

Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8 to 550V

Peak Pulse Power 1500W Breakdown Voltage 6.8 to 550V Features ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ● Glass passivated junction ● 1500W peak pulse power capabililty on 10/1000us waveform, repetition rate (duty cycle): 0.05 ● Excellent clamping

TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● High Temperat Soldering Guaranteed : 265 °C/10 sec/.375. (9.5mm) Lead Length, 5

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPESSOR

Breakdown Voltage:6.8-440 Volts Pesk Pulse Power:1500 Watts FEATURE ♦ 1500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦

1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

Features • Economical Series and Quick Response • Available in Both Unidirectional and Bidirectional Construction • 1500Watts Peak Power Dissipation • Excellent Clamping Capability • UL Recognized File#E331408 • Lead Free Finish/RoHS Compliant(Note 1) (P Suffix designates RoHS Compliant. See

Transient Voltage Suppressors Breakdown Voltage 6.8 to 440V

Features • Plastic package • Excellent clamping capability • High temperature soldering guaranteed: 265℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with RoHS standard

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000ns waveform repetition rate (duty cycle): 0.05 ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response

Transient Voltage Suppressor Diodes

■ Features ● PPP 1500W ● VBR 6.8V-540V ■ Applications ● Clamping Voltage

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in Molded Plastic package ● 1500W surge capability at 1ms ● Excellent clamping capability

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Unidirectional & Bidirectional Transient Voltage Suppressors

DESCRIPTION The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400CA offers similar voltages with an extended voltage range and also provides bidirectional options with a C o

Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms.

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

TRANSZORB??TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000µs waveform repetition rate (duty cycle): 0.05 ♦ Excellent clam

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE- 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1 ms • Excellent clamping capab

Transient Voltage Suppressors

GENERAL PURPOSE TRANSIENT SUPPRESSORS

Plastic package has UL flammability Classification 94V-0

Reverse Voltage: 6.8 to 440 V Peak Pulse Power: 1500 W Features • Plastic package has UL flammability Classification 94V-0 • 1500 W peak pulse power capability on 10/1000 µs waveform, repetition rate (duty cycle): 0.01 • Excellent clamping capability • Low incremental surge res

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-201 package. ◇ 1,500W surge capability at 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR less than 1μA above 10

Axial Lead Transient Voltage Suppressors

1.5KE Series 6.8 To 600 V 1500W Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-201 Package ♦ Low leak

Fast response time: typically less than 1 ns

Features • Working peak reverse voltage range – 58.1V. • Peak power dissipation 1500W @10 x 1000 us Pulse • Excellent clamping capability. • Fast response time: typically less than 1 ns. • Typical IR less than 1uA above 10V. • Plastic material has UL flammability classification 9

Transient Voltage Suppressors

Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Plastic material has UL flammability classification 94V-O • Typical IR less than 1uA above 12V • Fast res

Low zener impedance.

DESCRIPTION: The 1.5KE series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 6.8 volts to 600 volts. They provide a clamping voltage lower than

1500 WattsTransient Voltage Suppressor Diodes

Features ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ 1500W surge capability at 10 x 1000 us waveform ◇ Excellent clamping capability ◇ Low Dynamic impedance ◇ Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns