丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

丝印代码：063A；Tiny Real-Time Clock/calendar with alarm function and I2C-bus

包装：盒 描述：TAPERED CAP - OD RANGE: 50.3 - 5 五金件，紧固件，配件 孔插头 - 锥形盖

High Performance Filters for High Current Three Phase Applications

文件：64.379 Kbytes Page：2 Pages

High CMR Line Receiver Optocouplers

Description The HCPL-2602/12 are optically coupled line receivers that combine a GaAsP light emitting diode, an input current regulator and an integrated high gain photo detector. The input regulator serves as a line termination for line receiver applications. It clamps the line voltage and regul

High CMR, High Speed TTL Compatible Optocouplers

Description The 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky clamped transi

HCMOS Compatible, High CMR, 10 MBd Optocouplers

Description The HCPL-261A family of optically coupled gates shown on this data sheet provide all the benefits of the industry standard 6N137 family with the added benefit of HCMOS compatible input current. This allows direct interface to all common circuit topologies without additional LED buffer

Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Camera

Description The ICX063AL is an interline CCD solid-state image sensor suitable for CCIR black-and-white video cameras with a diagonal 11mm (Type 2/3) system. High sensitivity is achieved by adopting HAD (Hole-Accumulation Diode) sensors. The chip features a field period readout system and an ele

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

* 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical IR less then 1mA above 10V