TEN 40E and_TEN 40WIE Series DC/DC Power Converters
TRACO Powers converters are protected against short circuit， overvoltage， and_overtemperature
Image of Traco Powers TEN 40E and_TEN 40WIE SeriesTRACO Powers next-generation 40 W DC/DC converters were developed to maximize performance， reliability， and_cost-efficiency in the industry-standard 2 x 1 footprint. Features include six-sided metal shielding， remote on/off， and_output voltage trim functions with certification to IEC/EN/UL 62368-1 with either a 2:1 input (TEN 40E) or 4:1 input (TEN 40WIE) range.
Efficiencies up to 93%_allow minimal heat-loss and_a full-load convection-cooled operation of -40°C to +70°C ambient (model dependent) and_operation up to +85°C with derating. The MTBF has been extended to <1.2 million hours according to MIL-HDBK-217F and_is protected against short circuit， overvoltage， and_overtemperature. Typical applications include industrial equipment， instrumentation， and_any distributed power architecture where space is critical on the PCB.
Features
Reduced-cost with improved performance
2” x 1” metal package (six-side shielded)
Wide 2:1 input or ultra-wide 4:1 input ranges
High efficiencies up to 93%_
Operating temperature range -40°C to +85°C
1600 VDC I/O-isolation
Remote on/off and_trim function
Short circuit， overvoltage， and_overtemperature protection
Three-year product warranty
Mechanical Drawing
Image of Traco Powers Mechanical Diagram
